DFR1136 – 2x3A DC motor driver carrier board for UNIHIKER M10

2x3A DC motor driver carrier board for UNIHIKER M10

Educational STEM Coding & Sensor Starter Packs

  • DC Motor x2
  • M3
  • 70g
  • 3.3V
Manufacturer part number
DFR1136
Manufacturer
DFRobot
Motor interface
DC Motor x2
Mounting Hole
M3

DFRobot carrier board that turns the UNIHIKER M10 into a compact robotics controller, with dual 2x3A DC motor drive and several power input options.

Product overview

DFRobot DFR1136 DC motor driver board for UNIHIKER M10. Overview — This carrier board, a dual DC motor driver, turns the UNIHIKER M10 into a compact controller for robotics and interactive projects, with the screen set at an ergonomic viewing angle. Motor control — The board integrates a dual-channel DC driver able to run two motors at the same time, each rated 3A, with independent motor power separate from the main controller. Power supply — Three inputs are available: USB Type-C, a 6-12V DC barrel jack and a terminal block; an HY2.0 4-pin adapter port powers the UNIHIKER M10 directly. A power switch controls both the motor power and the USB output. Expansion and connectivity — Ten 3-pin I/O ports and four I2C interfaces, with 5V I2C support, connect sensors and modules from the Gravity range. Signalling — Three WS2812 RGB LEDs and infrared communication provide visual feedback and debugging. Specifications — Working voltage 3.3V, dimensions 98x58.5 mm, weight 70 g, M3 mounting holes. Typical uses — Mobile robot platforms, automated mechanisms and STEM educational projects. Integration — The board mounts on the UNIHIKER M10 and works with the Gravity ecosystem for rapid prototyping. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Motor interface: DC Motor x2
  • Mounting Hole: M3
  • Multiple power supply options: USB Type‑C, DC barrel jack (6–12V), and terminal block
  • Power switch: controls the power supply of the USB adapter port and the motor drive
  • Size: 98x58.5mm / 3.86x2.30in
  • USB adapter port: HY2.0 4Pin interface, used to power the UNIHIKER

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote