DFRobot DFR1139 IoT development board based on the ESP32-WROOM-32E-N16R2 module, with a dual-core 240 MHz processor, Wi-Fi 802.11 b/g/n and Bluetooth 4.2 BR/EDR and BLE for embedded projects.
Bluetooth Frequency Range2.4~2.5GHz
Wi-Fi Frequency Range2.4~2.5 GHz
DAC Interface×2
Display InterfaceGDI
I2C Interface×1
I2S Interface×1
Product overview
IoT board DFRobot DFR1139. The FireBeetle 2 ESP32-E is an IoT development board built around the ESP32-WROOM-32E-N16R2 module, reference DFR1139 from DFRobot, intended for prototyping and connected embedded projects.
Main characteristics. The dual-core processor runs at 240 MHz and provides 16 MB of Flash, 2 MB of PSRAM, 520 KB of SRAM and 448 KB of ROM. The board measures 25.4 mm × 60 mm for a weight of 23.4 g and integrates a PCB antenna on the module.
Connectivity. The Wi-Fi link covers the 2.4 to 2.5 GHz band under 802.11 b/g/n/d/e/i/k/r, with throughput up to 150 Mbps in 802.11n. Bluetooth complies with the V4.2 BR/EDR and BLE standards and supports CVSD and SBC audio.
Interfaces. The board offers 17 digital pins, 11 analog pins, 3 UART, 1 SPI, 1 I2C, 1 I2S, 2 DAC, 7 touch interfaces, 16 LED PWM channels and a GDI display interface. An RGB LED WS2812 is fitted on the board.
Power. The board accepts 5 V DC via USB-C or a 3.7 V Li-ion battery through a PH2.0 connector, with automatic switching between both sources and charging mode.
Typical uses. The UART, SPI and I2C interfaces allow connecting the board to sensors, displays or external modules. Compatibility with the FireBeetle V2 series eases the reuse of existing projects.
Integration. The stamp-hole design allows embedding the board or mounting it on a printed circuit prototype. The board is programmable with the Arduino IDE, ESP-IDF and MicroPython.
DFRobot DFR1139 IoT development board based on the ESP32-WROOM-32E-N16R2 module, with a dual-core 240 MHz processor, Wi-Fi 802.11 b/g/n and Bluetooth 4.2 BR/EDR and BLE for embedded projects.
802.11 b/g/n/d/e/i/k/r (802.11n, up to 150 Mbps), A-MPDU and A-MSDU aggregation, supports 0.4us protection interval
Wi-Fi Standard
FCC/CE/TELEC/KCC
Applications and use cases
Architectures in which DFR1139 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for DFR1139 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
DFR1139
FireBeetle 2 IoT board dual-core 240 MHz Wi-Fi and Bluetooth
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details