DFR1140
ESP32 IoT board with external antenna connector, 16 MB Flash

- Bluetooth Frequency Range
- 2.4~2.5GHz
- Wi-Fi Frequency Range
- 2.4~2.5 GHz
- DAC Interface
- ×2
- Display Interface
- GDI
ESP32 IoT board with external antenna connector, 16 MB Flash
Antennas, RF Interconnect & Electromagnetic Components
DFRobot development board based on the ESP32-WROOM-32UE-N16R2 module, with 2.4 GHz Wi-Fi, Bluetooth 4.2 and an external antenna connector.
Overview. The DFRobot FireBeetle 2 ESP32-UE (N16R2) is an IoT board based on the Espressif ESP32-WROOM-32UE-N16R2 module, with a connector for an external Wi-Fi/Bluetooth antenna. It can be programmed with Arduino IDE, ESP-IDF and MicroPython.
Main characteristics. 32-bit dual-core processor at 240 MHz, 16 MB Flash, 2 MB PSRAM, 520 KB SRAM and 448 KB ROM. Dimensions 25.4 mm × 60 mm, weight 23.4 g.
Interfaces and connectivity. Wi-Fi 802.11 b/g/n/d/e/i/k/r (up to 150 Mbps) in the 2.4 to 2.5 GHz band, and Bluetooth V4.2 BR/EDR and BLE with CVSD and SBC audio support. The external antenna connector allows a higher gain than an onboard PCB antenna.
Peripherals. 17 digital pins, 11 analog pins, 3 UART interfaces, 1 I2C interface, 1 SPI interface, 1 I2S interface, 2 DAC interfaces, 7 touch interfaces, 16 PWM LED channels and a GDI display interface. A WS2812 RGB LED is onboard.
Power. 5 V DC via USB-C or 3.7 V Li-ion battery via PH2.0 connector, with automatic switching between sources and charging.
Typical uses. Development of Wi-Fi or Bluetooth IoT nodes, prototyping of embedded boards thanks to the stamp-hole format, and connection of displays through the GDI interface.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR1140, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| CPU frequency | 240MHz |
| Analog Pins × 11 | IO0, IO2, IO4, IO12, IO13, IO14, IO15, IO25, IO26, I34, I35 |
| Bluetooth audio | CVSD and SBC audio |
| Bluetooth Frequency Range | 2.4~2.5GHz |
| Bluetooth protocol | Compliant with Bluetooth V4.2 BR/EDR and BLE standards |
| DAC Interface | ×2 |
| Digital Pins × 17 | IO0, IO1, IO2, IO3, IO4, IO12, IO13, IO14, IO15, IO17, IO18, IO19, IO21, IO22, IO23, IO25, IO26 |
| Display Interface | GDI |
| Flash | 16MB |
| I2C Interface | ×1 |
| I2S Interface | ×1 |
| Interface Compatibility | FireBeetle V2 series compatible |
| LED PWM Channels | ×16 |
| Module size | 25.4mm × 60mm |
| On-chip Clock | 40MHz crystal oscillator, 32.768KHz crystal oscillator |
| PH2.0 interface | 3.7V Li-ion |
| PSRAM | 2MB |
| RGB LED | WS2812 |
| ROM | 448KB |
| SPI interface | ×1 |
| SRAM | 520KB |
| Touch Interfaces | ×7 |
| UART Interfaces | ×3 |
| USB-C interface | 5V DC |
| VCC pin | 5V DC |
| Weight | 23.4g |
| Wi-Fi Frequency Range | 2.4~2.5 GHz |
| Wi-Fi Protocol | 802.11 b/g/n/d/e/i/k/r (802.11n, up to 150 Mbps), A-MPDU and A-MSDU aggregation, supports 0.4us protection interval |
| Wi-Fi Standard | FCC/CE/TELEC/KCC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR1140. For a missing document or a specific revision, our experts send it to you.
DFRobot development board based on the ESP32-WROOM-32UE-N16R2 module, with 2.4 GHz Wi-Fi, Bluetooth 4.2 and an external antenna connector.
| Parameter | Value |
|---|---|
| CPU frequency | 240MHz |
| Analog Pins × 11 | IO0, IO2, IO4, IO12, IO13, IO14, IO15, IO25, IO26, I34, I35 |
| Bluetooth audio | CVSD and SBC audio |
| Bluetooth Frequency Range | 2.4~2.5GHz |
| Bluetooth protocol | Compliant with Bluetooth V4.2 BR/EDR and BLE standards |
| DAC Interface | ×2 |
| Digital Pins × 17 | IO0, IO1, IO2, IO3, IO4, IO12, IO13, IO14, IO15, IO17, IO18, IO19, IO21, IO22, IO23, IO25, IO26 |
| Display Interface | GDI |
| Flash | 16MB |
| I2C Interface | ×1 |
| I2S Interface | ×1 |
| Interface Compatibility | FireBeetle V2 series compatible |
| LED PWM Channels | ×16 |
| Module size | 25.4mm × 60mm |
| On-chip Clock | 40MHz crystal oscillator, 32.768KHz crystal oscillator |
| PH2.0 interface | 3.7V Li-ion |
| PSRAM | 2MB |
| RGB LED | WS2812 |
| ROM | 448KB |
| SPI interface | ×1 |
| SRAM | 520KB |
| Touch Interfaces | ×7 |
| UART Interfaces | ×3 |
| USB-C interface | 5V DC |
| VCC pin | 5V DC |
| Weight | 23.4g |
| Wi-Fi Frequency Range | 2.4~2.5 GHz |
| Wi-Fi Protocol | 802.11 b/g/n/d/e/i/k/r (802.11n, up to 150 Mbps), A-MPDU and A-MSDU aggregation, supports 0.4us protection interval |
| Wi-Fi Standard | FCC/CE/TELEC/KCC |
Answers to the questions that the recorded characteristics of DFR1140 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "I2C Interface": ×1.
Yes — recorded under "SPI interface": ×1.
Yes — recorded under "Wi-Fi Frequency Range": 2.4~2.5 GHz.
Yes — recorded under "Bluetooth audio": CVSD and SBC audio.
Yes — recorded under "Weight": 23.4g.
Yes — recorded under "USB-C interface": 5V DC.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
ESP32 IoT board with external antenna connector, 16 MB Flash

4G Antenna Kit for LTE Cat 4 EC25 mini-PCIe

Long Range Indoor Antenna Kit; 860-930MHz; 3dBi; 295mm

Antenna QuSector Nf

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR1140 |
| Manufacturer | DFRobot |
Antennas, RF Interconnect & Electromagnetic Components
Serial to Wi-Fi converter for RS232, RS422 and RS485 · Ref. : CSW-H85K2
Price on request
Antennas, RF Interconnect & Electromagnetic Components
Digital TV tuner for Android phones and tablets · Ref. : PAD-TUNER
Price on request
Antennas, RF Interconnect & Electromagnetic Components
Outdoor 2.4 GHz and 5 GHz WiFi panel antenna
Price on request
Antennas, RF Interconnect & Electromagnetic Components
Active GPS antenna with low noise amplifier
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details