28BYJ-48 – 28BYJ-48 Stepper Motor Module with A4988 Driver 5 V

28BYJ-48 Stepper Motor Module with A4988 Driver 5 V

Educational STEM Coding & Sensor Starter Packs

  • STEP, DIR, 5V, GND
  • 42mm x 42mm
  • 4x Integrated M3 Nuts
  • 0.5 kgf·cm
Manufacturer part number
DFR1199
Manufacturer
DFRobot
Physical Interface
4-Pin (STEP, DIR, 5V, GND)
Dimensions
42mm x 42mm

All-in-one stepper motor module with a 1:64 geared 28BYJ-48 motor and integrated A4988 driver, for precise positioning in robotics, prototyping and STEM education projects.

Product overview

28BYJ-48 from DFRobot, stepper motor module with A4988 driver — The DFR1199 combines the geared 28BYJ-48 stepper motor and the A4988 driver on a single compact board, with no external driver or complex wiring between motor and driver.

Main characteristics. 5 V DC operating voltage, 1:64 gear ratio, holding torque of 0.9 kgf·cm and detent torque of 0.5 kgf·cm. The module provides 4096 output steps per revolution in half-step mode, and microstepping is supported for smoother motion. Dimensions 42 mm x 42 mm.

Control interface. Simplified 4-pin interface: STEP, DIR, 5V and GND. STEP pulses set the rotation increment and DIR sets the direction, allowing accurate position control with simple firmware logic on Arduino, Raspberry Pi or ESP32 controllers.

Mounting. Four integrated M3 nuts on the board allow the assembly to be fixed to a robot frame or project enclosure with standard screws.

Typical uses. Rapid prototyping, robotics experiments and mechanical learning in STEM environments.

See all specifications

Highlights

  • Dimensions: 42mm x 42mm
  • Detent Torque: 0.5 kgf·cm
  • Gear ratio: 1:64
  • Holding Torque: 0.9 kgf·cm
  • Integrated Driver: A4988
  • Motor Type: 28BYJ-48 Geared Stepper

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote