DFRobot DFR1222 IoT development board built on the ESP32-C5 RISC-V microcontroller, with dual-band Wi-Fi 6 and power management including solar charging, for low-power sensor nodes.
Overview. The DFRobot FireBeetle 2 ESP32-C5 DFR1222 is an IoT development board built on the ESP32-C5 single-core RISC-V processor running at 240 MHz. It is designed for advanced smart home and extensive IoT applications.
Main characteristics. The processor provides 384 KB of SRAM, 16 KB of LP SRAM, 320 KB of ROM and 4 MB of Flash. Deep-sleep current is 21 µA when the board is battery powered.
Interfaces and connectivity. The Wi-Fi module operates in the 2.4 GHz and 5 GHz bands (1T1R) following IEEE 802.11a/b/g/n/ac/ax, that is Wi-Fi 6. It supports Station, SoftAP, SoftAP+Station and Promiscuous modes. On the Bluetooth side, the board supports Bluetooth 5 and Bluetooth mesh, with data rates of 125 Kbps, 500 Kbps, 1 Mbps and 2 Mbps. An infrared transceiver with 5 transmitting and 5 receiving channels is also integrated.
Power and environment. The board is powered at 5 V DC through the Type-C input, or through the VIN input at 5 V DC or from a 4.5 to 6 V solar panel. The maximum charging current is 0.5 A and the operating voltage is 3.3 V.
Dimensions. The module measures 25.4 x 60 mm.
Typical uses. This board suits the development of home automation sensor nodes communicating via MQTT, Zigbee or Matter, depending on the protocols supported by the platform, as well as local controllers powered by a solar panel.
DFRobot DFR1222 IoT development board built on the ESP32-C5 RISC-V microcontroller, with dual-band Wi-Fi 6 and power management including solar charging, for low-power sensor nodes.
Station mode, SoftAP mode, SoftAP+Station mode and Promiscuous mode
WI-FI Protocols
IEEE 802.11a/b/g/n/ac/ax
Applications and use cases
Architectures in which DFR1222 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for DFR1222 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
DFR1222
ESP32-C5 Wi-Fi 6 dual-band IoT board with solar charging
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details