EDGE101 – Industrial programmable IoT controller with 4G CAT1

Industrial programmable IoT controller with 4G CAT1

Serial-to-Ethernet Device Servers (RS-232/422/485)

  • –20°C to +75°C
  • 16 MB
  • 128 mm × 76 mm × 31 mm
  • not supported
Manufacturer part number
DFR1283
Manufacturer
DFRobot
Operating Temperature Range
–20°C to +75°C
Flash
16 MB

The DFRobot EDGE101 programmable IoT controller is an industrial ESP32-based controller with RS485, CAN, Ethernet and a pre-installed 4G CAT1 module for monitoring and IoT gateway applications.

Product overview

Overview. The DFRobot EDGE101 industrial programmable IoT controller (4G CAT1), reference DFR1283, is an ESP32-based programmable controller for industrial IoT nodes, gateways and monitoring. It combines Arduino-compatible development workflows with field-ready interfaces.

Main characteristics. ESP32 dual-core 32-bit processor clocked at 240 MHz, with computing capability of up to 600 MIPS. 520 KB SRAM, 16 KB RTC SRAM and 16 MB Flash. Rugged metal enclosure, dimensions 128 mm × 76 mm × 31 mm, weight 335 g.

Interfaces and connectivity. Pre-installed LTE Cat 1 bis 4G module with FDD bands B1/2/3/4/5/7/8/12/13/14/17/18/19/20/25/26/28/66/71 and TDD bands B34/38/39/40/41, Nano SIM slot. 10/100 Mbps Ethernet, Wi-Fi, Bluetooth 4.2, isolated RS485 and isolated CAN bus interfaces. Three I²C interfaces and 11 native ESP32 GPIOs.

Power and environment. Power input of 9–26 V, or 5 V 2 A via USB Type-C. Static power consumption of 50 mA at 12.0 V or 100 mA at USB 5.0 V. Operating temperature range –20 °C to +75 °C.

Typical uses. Connection of Modbus equipment and CAN devices, remote supervision over the cellular network, and sensor integration over I²C and GPIO.

Integration. OTA firmware upgrades and TF card storage. DIN rail or wall mounting. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Dimensions: 128 mm × 76 mm × 31 mm
  • Supply voltage: 9–26 V, or 5 V 2 A via USB Type-C
  • Flash: 16 MB
  • GNSS positioning: not supported
  • LTE FDD: B1/2/3/4/5/7/8/12/13/14/17/18/19/20/25/26/28/66/71
  • LTE - TDD: B34/38/39/40/41

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 9–26 V, or 5 V 2 A via USB Type-C.
  • Thermal: rated operating range –20°C to +75°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote