Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DRI0009 – 2x2A DC motor shield for Arduino

2x2A DC motor shield for Arduino

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
DRI0009
Manufacturer
DFRobot

DFRobot DRI0009 motor shield that stacks directly onto Arduino Uno and Mega to drive two DC motors up to 2 A each, mainly for educational mobile robots.

Product overview

Overview. The DFRobot DRI0009 is a DC motor driver shield for Arduino that drives two DC motors, up to 2 A each. It mounts directly onto Arduino Uno R3 and Mega 1280/2560 boards and requires no complex wiring.

Main characteristics. The shield is based on the L298P chip. It accepts a motor voltage of 6.5 to 12 V from the VIN power supply and 4.8 to 35 V from an external power source, with a motor driving current Io of 2 A or less. The logic supply current Iss is 36 mA or less, and the maximum power consumption is 25 W at T = 75 °C. Dimensions are 55 x 55 mm (2.2 x 2.2 in).

Interfaces and control. Pins 4, 5, 6 and 7 drive the two motors. Speed is controlled by PWM, and the shield also supports PLL advanced speed control. The 5 V logic voltage is supplied by the Arduino.

Power supply. The shield can be powered directly from the Arduino or from an external source. The manufacturer strongly recommends an external power supply.

Typical uses. The shield suits Arduino robot cars with two or four wheels (2WD / 4WD), obstacle avoidance and line-following robots, STEM robotics kits, and small DC motor automation projects.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote