Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

FIT0352 – Addressable Digital RGB LED Strip 60 LEDs/m, 3 m

Addressable Digital RGB LED Strip 60 LEDs/m, 3 m

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
FIT0352
Manufacturer
DFRobot

DFRobot FIT0352 digital RGB LED strip with individually addressable 5050 LEDs driven by WS2811 circuits, for decorative and interactive lighting.

Product overview

DFRobot FIT0352, 3 m digital RGB LED strip — this addressable WS2811 RGB LED strip is built from individually driven 5050 LEDs. Main characteristics — Each LED integrates a control circuit (one WS2811 IC per LED, so 60 ICs per meter), allowing the colour of each pixel to be set independently. The grayscale is 256 levels and the data speed is 800 Kbps. The strip is built on FPCB, its emitting angle is 180 °, and it can be cut to the required length. Interfaces and connectivity — Data is transmitted over a single serial line, which simplifies wiring along the whole length of the chain. Power and environment — The working voltage is 3.3 to 6 V; power consumption is 18 W ± 10 % per metre, with a maximum current of 1 A per metre at 5 V. The waterproof level is weatherproof. The weight is 150 g per roll. Typical uses — Decorative lighting, interactive installations and custom lighting projects, driven from an Arduino-type board. Integration — The LEDs can work at 3.3 to 6 V, but the luminance changes with the supply voltage.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote