Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MTO1804 – Brushless DC motor 2480 KV with 20A ESC

Brushless DC motor 2480 KV with 20A ESC

ESCs and Power Distribution

Manufacturer part number
FIT0633
Manufacturer
DFRobot

MTO1804 brushless DC motor rated 2480 KV, supplied with a 20 A ESC, for multirotor drones and intelligent robots. It requires a drive board.

Product overview

DFRobot MTO1804. Brushless DC motor (CW) rated 2480 KV, supplied with its 20 A electronic speed controller (ESC), designed for multirotor drones and robotics.

Motor characteristics. 18 mm stator diameter with 4 mm stator length, M5 axis (0.8 mm), outside dimensions Φ23 × 25.1 mm, weight 16 g. Powered by 2 to 3 lithium batteries. N40UH ferrite boron magnets, 0.2 mm cold-rolled low iron loss silicon steel laminations, 100% dynamic balance calibration, oxygen-free copper winding with 220 °C heat-resistant temperature.

Power and current. Maximum continuous current of 5 A for the motor, maximum continuous power of 55.5 W. The ESC delivers 20 A continuous and 25 A peak, for an input of 2 to 4 lithium batteries. It has no BEC and weighs 7.5 g, dimensions 27 × 12 mm.

Bearings and reliability. NSK bearings for stable rotation, good resistance to falls and low noise. The maximum hollow design reduces weight and improves thermal performance.

Uses and integration. Suitable for multirotor drones, intelligent robots and professional aerial photography. The motor must be used with the drive board. Available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote