FIT0772
Industrial RS485 Repeater with Optical Isolation

- Interface Standard
- RS485 connector compatible with EIA/TIA
- Power Consumption in Static State
- 0.6W
- Storage Temperature
- -40°C ~ +85°C
- Baud rate
- 0~115200bps (self-adaptive)
Industrial RS485 Repeater with Optical Isolation
Educational STEM Coding & Sensor Starter Packs
Optically isolated RS485 repeater that amplifies and extends RS485 buses up to 1200 m in industrial automation networks.
DFRobot FIT0772 RS485 repeater. The DFRobot FIT0772 is an industrial-grade RS485 repeater that converts one-way RS485 to one-way RS485, with complete transparent data transmission in asynchronous half-duplex, compliant with the EIA/TIA RS485 standard.
Main characteristics. The baud rate is self-adaptive from 0 to 115200 bps. One repeater extends the communication distance to 1200 m at 9600 bps. It is not restricted by the software protocol and the RS485 terminal can cascade up to 128 enhanced RS485 devices, with a maximum of 32 nodes per RS485 interface and a distance between nodes of no more than 10 m. The module automatically senses the direction of data flow.
Interfaces and isolation. Input and output each provide A+, B- and GND terminals. Optocoupler isolation and the built-in DC-DC module give an isolation voltage of 1500 V, which protects the master-slave bus from ground loops and common-mode voltage differences. TVS transient protection, self-recovery fuse current limiting and anti-reverse power protection complete the design. PWR, RXD and TXD indicators show power and data transmission activity.
Power and environment. Working voltage DC 9 V to 24 V, static power consumption 0.6 W, DC-005 power socket (12 V/1 A, 5.5/2.1 mm adapter). Working temperature from -20 °C to +70 °C, storage temperature from -40 °C to +85 °C, relative humidity from 5% to 95%. Mounted on 35 mm DIN rails, overall size 109 × 60 × 33 mm.
Typical uses. Signal acquisition and control of industrial field equipment, industrial automation and power acquisition over RS485 buses.
Integration. Supports twisted pair or shielded wire transmission media. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for FIT0772, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Baud rate | 0~115200bps (self-adaptive) |
| Cascade | RS485 terminal can cascade up to 128 enhanced RS485 devices |
| Communication Distance | one repeater extends 1200m (at 9600bps) |
| Communication Protocol | not restricted by the software protocol |
| Indicator — PWR | Power Indicator |
| Indicator — RXD | Data receiving indicator of the input end |
| Indicator — TXD | Data transmitting indicator of the input end |
| Input — A+ | Positive signal of RS485 input end |
| Input — B- | Negative signal of RS486 input end |
| Input — GND | RS485 input end ground |
| Installation Method | 35mm DIN rails |
| Interface Standard | RS485 connector compatible with EIA/TIA |
| Output — A+ | Positive signal of RS485 output end |
| Output — B- | Negative signal of RS486 output end |
| Output — GND | RS485 output end ground |
| Power — 24V+ | DC 24V Power+ |
| Power Consumption in Static State | 0.6W |
| Power — GND | DC 24V Power- |
| Power Socket — DC-005 | 12V/1A, 5.5/2.1mm Adapter |
| Relative humidity | 5% ~ 95% |
| Size | 109*60*33mm/4.29*2.36*1.30” (L*W*H overall size) |
| Storage Temperature | -40°C ~ +85°C |
| Supported Nodes | a single RS485 interface supports a maximum of 32 nodes (the distance between nodes must be ≤10m) |
| Transmission Medium | twisted pair or shielded wire |
| Working temperature | -20°C ~ +70°C |
| Working voltage | DC 9V~24V, active design, with anti-reverse protection |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for FIT0772. For a missing document or a specific revision, our experts send it to you.
Optically isolated RS485 repeater that amplifies and extends RS485 buses up to 1200 m in industrial automation networks.
| Parameter | Value |
|---|---|
| Baud rate | 0~115200bps (self-adaptive) |
| Cascade | RS485 terminal can cascade up to 128 enhanced RS485 devices |
| Communication Distance | one repeater extends 1200m (at 9600bps) |
| Communication Protocol | not restricted by the software protocol |
| Indicator — PWR | Power Indicator |
| Indicator — RXD | Data receiving indicator of the input end |
| Indicator — TXD | Data transmitting indicator of the input end |
| Input — A+ | Positive signal of RS485 input end |
| Input — B- | Negative signal of RS486 input end |
| Input — GND | RS485 input end ground |
| Installation Method | 35mm DIN rails |
| Interface Standard | RS485 connector compatible with EIA/TIA |
| Output — A+ | Positive signal of RS485 output end |
| Output — B- | Negative signal of RS486 output end |
| Output — GND | RS485 output end ground |
| Power — 24V+ | DC 24V Power+ |
| Power Consumption in Static State | 0.6W |
| Power — GND | DC 24V Power- |
| Power Socket — DC-005 | 12V/1A, 5.5/2.1mm Adapter |
| Relative humidity | 5% ~ 95% |
| Size | 109*60*33mm/4.29*2.36*1.30” (L*W*H overall size) |
| Storage Temperature | -40°C ~ +85°C |
| Supported Nodes | a single RS485 interface supports a maximum of 32 nodes (the distance between nodes must be ≤10m) |
| Transmission Medium | twisted pair or shielded wire |
| Working temperature | -20°C ~ +70°C |
| Working voltage | DC 9V~24V, active design, with anti-reverse protection |
Answers to the questions that the recorded characteristics of FIT0772 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Cascade": RS485 terminal can cascade up to 128 enhanced RS485 devices.
Yes — recorded under "Cascade": RS485 terminal can cascade up to 128 enhanced RS485 devices.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial RS485 Repeater with Optical Isolation

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | FIT0772 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details