R42SR – M.2 Key-M PCI-E x4 Extension Cable 0.1 m

M.2 Key-M PCI-E x4 Extension Cable 0.1 m

Educational STEM Coding & Sensor Starter Packs

  • 0.1m / 3.94 inch
Manufacturer part number
FIT0782
Manufacturer
DFRobot
Length
0.1m / 3.94 inch
SKU
FIT0782

The DFRobot R42SR is a 0.1 m M.2 Key-M PCI-E x4 extension cable for LattePanda Alpha, Delta and Sigma boards, for high-speed network cards, capture cards, NVMe SSDs and USB adapter cards.

Product overview

Overview. The DFRobot R42SR is an M.2 Key-M PCI-E x4 extension cable, a PCI-E adapter board cable designed for LattePanda Alpha, Delta and Sigma boards.

Main characteristics. The cable provides stable PCIe 3.0 full-speed transmission, with a maximum speed of 32G/bps. Its length is 0.1 m (3.94 inch). The differential signal design without holes avoids signal attenuation caused by parasitic capacitance and parasitic inductance. Copper thickness is 1oz and the gold fingers have sufficient gold content for good conductivity. The metal welding point is protected by a 3 mm PCB gasket and fastened with screws and hex nuts.

Interfaces and connectivity. The cable supports high-speed network cards, capture cards, NVMe SSD cards, USB adapter cards and PCI-E x4 interfaces.

Power. The M.2 interface has no 12V power supply capability itself. The cable must be connected to a 12V power PCIe card to operate normally. The power port pin definition is provided by the manufacturer.

Typical uses. The cable connects a PCIe x4 expansion card to a LattePanda Alpha, Delta or Sigma board, for example an NVMe SSD or a network card.

Installation. The PCB is designed compact and thick so that it does not catch on a graphics card, making installation easier. The connection direction must be respected to avoid damaging the device.

See all specifications

Highlights

  • Bandwidth Speed: PCIe3.0x4 full speed, up to 32G/bps
  • Figure: Pin Definition Diagram for the Power Port
  • Length: 0.1m / 3.94 inch
  • SKU: FIT0782

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote