FIT0800
Amphibious Horizontal Submersible Pump, Low Flow

- Power Supply Voltage
- DC 3-6V
- Current
- 150~370mA
- Flow
- 80-100L/H
- Power
- 0.4~2W
Amphibious Horizontal Submersible Pump, Low Flow
Educational STEM Coding & Sensor Starter Packs
DFRobot FIT0800 amphibious horizontal submersible pump, powered at 3 to 6V DC, for fountains, water changing and plant watering.
Overview. The DFRobot FIT0800 is an amphibious horizontal submersible pump powered by DC current, designed to work either submerged or out of water. It is intended for fountain, water changing and plant watering projects.
Main characteristics. It operates from 3 to 6V DC and draws 150 to 370mA, for a power of 0.4 to 2W. Its flow rate is 80 to 100 L/H with a lift of 25 to 45 cm.
Hydraulic connection. The water inlet and outlet are 5mm (0.20 inch) in diameter, allowing direct connection to small-bore tubing.
Typical uses. Supplying a fountain, emptying or partially filling a tank, low-flow automatic watering of potted plants.
Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for FIT0800, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Current | 150~370mA |
| Flow | 80-100L/H |
| Power | 0.4~2W |
| Power Supply Voltage | DC 3-6V |
| Pump Lift | 25-45cm |
| Water Inlet and Outlet | 5mm/0.20” |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for FIT0800. For a missing document or a specific revision, our experts send it to you.
DFRobot FIT0800 amphibious horizontal submersible pump, powered at 3 to 6V DC, for fountains, water changing and plant watering.
| Parameter | Value |
|---|---|
| Current | 150~370mA |
| Flow | 80-100L/H |
| Power | 0.4~2W |
| Power Supply Voltage | DC 3-6V |
| Pump Lift | 25-45cm |
| Water Inlet and Outlet | 5mm/0.20” |
Points to check before using FIT0800 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Current | 150~370mA |
| Power | 0.4~2W |
| Power Supply Voltage | DC 3-6V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of FIT0800 can answer. A question is not asked when nothing is recorded to answer it.
DC 3-6V (source: Power Supply Voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Amphibious Horizontal Submersible Pump, Low Flow

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | FIT0800 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details