FIT0833
IPEX MHF1 to SMA Female Connector Cable 100 mm (2 pcs)

- Interface
- IPEX MHF1 to SMA
- Applicable Frequency Band
- 0-6G
- Analog bandwidth
- 100Mhz
- Impedance
- 50Ω
IPEX MHF1 to SMA Female Connector Cable 100 mm (2 pcs)
Pack of two 100 mm DFRobot coaxial cables linking an IPEX MHF1 connector to an SMA female connector, to connect an external antenna to a Wi-Fi, GPS, 4G or 5G module.
Overview. The DFRobot FIT0833 is a pack of two 100 mm coaxial cables linking an IPEX MHF1 connector to an SMA female connector. It connects an external antenna to a module fitted with an IPEX MHF1 socket.
Main characteristics. 50 Ω impedance, applicable frequency band of 0 to 6 GHz, analogue bandwidth of 100 MHz and standing wave ratio of 1.5 or less. The cable uses RG1.13 wire and gold-plated connectors. The manufacturer describes it as rust-resistant and fold-resistant.
Interfaces and connectivity. Module side: IPEX MHF1 connector. Antenna side: SMA female connector.
Typical uses. Linking an external antenna to a Wi-Fi, GPS, 4G or 5G module fitted with an IPEX MHF1 socket.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for FIT0833, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Analog bandwidth | 100Mhz |
| Applicable Frequency Band | 0-6G |
| Impedance | 50Ω |
| Interface | IPEX MHF1 to SMA |
| Line Length | 10cm |
| Standing Wave Ratio | ≤1.5 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for FIT0833. For a missing document or a specific revision, our experts send it to you.
Pack of two 100 mm DFRobot coaxial cables linking an IPEX MHF1 connector to an SMA female connector, to connect an external antenna to a Wi-Fi, GPS, 4G or 5G module.
| Parameter | Value |
|---|---|
| Analog bandwidth | 100Mhz |
| Applicable Frequency Band | 0-6G |
| Impedance | 50Ω |
| Interface | IPEX MHF1 to SMA |
| Line Length | 10cm |
| Standing Wave Ratio | ≤1.5 |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
IPEX MHF1 to SMA Female Connector Cable 100 mm (2 pcs)

WiFi Espressif ESP32

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Arduino Open Source

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Voice Processing

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | FIT0833 |
| Manufacturer | DFRobot |
Wi-Fi and Bluetooth Modules
Wi-Fi and Bluetooth LE module with PCB antenna · Ref. : ESP32-S3-WROOM-1-N4R2
Price on request
Wi-Fi and Bluetooth Modules
M.2 2230 Wi-Fi 6 and Bluetooth 5.3 Card · Ref. : AP12275-M2
Price on request
Wi-Fi and Bluetooth Modules
802.11b/g/n Wi-Fi and Bluetooth SoC Module · Ref. : MCC32SESP
Price on request
Wi-Fi and Bluetooth Modules
Wi-Fi and NFC module with ARM Cortex-M3 microcontroller · Ref. : DFR0477
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details