FIT0845 – PTC Ceramic Heating Element 5 V 100 °C

PTC Ceramic Heating Element 5 V 100 °C

Educational STEM Coding & Sensor Starter Packs

  • <5W
Manufacturer part number
FIT0845
Manufacturer
DFRobot
Power
<5W

DFRobot FIT0845 ceramic PTC heating element that holds a constant temperature without a controller or sensor, for anti-freezing, dehumidification and heating small devices.

Product overview

DFRobot FIT0845. 5 V 100 °C ceramic PTC heating element, a Positive Temperature Coefficient thermistor-type heater.

Operation. When powered on, the element heats itself and its surface holds a constant temperature linked to the constant temperature of the PTC ceramic. No temperature controller and no temperature sensor such as a thermistor, thermal resistor or thermocouple is needed for feedback.

Main characteristics. Power under 5 W, dimensions 25 × 20 × 5 mm (0.98 × 0.79 × 0.20 inches), temperature 100 °C ±10 °C measured at an ambient temperature of 25 °C. The element works with both AC and DC supplies regardless of polarity.

Implementation. Several elements at the same voltage are connected in parallel and installed side by side without overlapping, so that heat does not offset. Power increases with the number of elements. The marked maximum power dissipation is a limit: actual power in use must remain below it, and the stable power depends strongly on heat dissipation conditions.

Typical uses. Instrument preheating and anti-freezing, solenoid valve anti-freezing, circuit board dehumidification, inkjet printer nozzle anti-freezing, and heating of small automated equipment operating unattended all year round.

Precautions. Strictly forbidden in flammable or explosive environments, do not immerse in water, and percussion or punching is prohibited.

See all specifications

Highlights

  • Power: <5W
  • Size: 25*20*5mm / 0.98*0.79*0.20 inches

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote