BM-NP – NPN to PNP Signal Converter Adapter Module

NPN to PNP Signal Converter Adapter Module

Educational STEM Coding & Sensor Starter Packs

  • -20℃~70℃
  • 100mA max
  • 1us
  • 35~85%RH
Manufacturer part number
FIT0850
Manufacturer
DFRobot
Operating Temperature
-20℃~70℃
Load Current
100mA max

DFRobot BM-NP signal converter module that converts an NPN normally open signal into a PNP normally open signal, to connect an NPN sensor to a PNP controller input.

Product overview

Overview. The DFRobot BM-NP signal converter is an adapter module that converts an NPN normally open (NPN.NO) signal into a PNP normally open (PNP.NO) signal. It resolves signal mismatches between a sensor and a controller when their logic types are not compatible.

Main characteristics. Response time of 1 µs, maximum load current of 100 mA and working voltage of 5 to 24 V DC. The module includes overcurrent protection and surge absorption to protect the connected device.

Operating conditions. Operating temperature from -20 °C to 70 °C, operating humidity from 35 to 85 %RH.

Typical uses. Adapting an NPN sensor to a PNP input in control equipment and sensor-based control systems.

See all specifications

Highlights

  • Response time: 1us
  • Conversion: NPN.NO-PNP.NO
  • Current Protection: Overcurrent protection, surge absorption
  • Load Current: 100mA max
  • Model: BM-NP
  • Operating Humidity: 35~85%RH

Good to know before integrating

  • Thermal: rated operating range -20℃~70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote