FIT0867 – 90° Right-angle Connector for 3-Pin LED Strip

90° Right-angle Connector for 3-Pin LED Strip

Educational STEM Coding & Sensor Starter Packs

  • Max 5A
  • -45℃~+105℃
  • 90°
  • 0.2mm-0.3mm
Manufacturer part number
FIT0867
Manufacturer
DFRobot
Current
Max 5A
Operating Current
-45℃~+105℃

Right-angle connector that links two 3-wire 10 mm LED strip segments at 90° without soldering. It lets lighting run around corners and edges.

Product overview

Overview. The DFRobot FIT0867 is a 90° right-angle LED strip connector that joins two 3-wire LED strip segments without soldering. Designed for 10 mm LED strips, it lets decorative lighting bend around a corner, an edge or a frame.

Main characteristics. The connector forms a compact L-shaped 90° junction. It suits LED strips with a thickness between 0.2 mm and 0.3 mm and a width of 10 mm. The maximum current is 5 A.

Installation. Both terminals use a snap-down locking structure that presses the strip pads against internal contacts, so no soldering tools are needed. The wires are color-labeled and the polarity is marked, which helps avoid wiring errors during assembly and maintenance.

Typical uses. This connector suits decorative lighting projects where routing must follow angles, such as cabinet lighting, display shelves, signage frames and indoor architectural accents.

Temperature range. The connector is specified for operation between -45 °C and +105 °C.

See all specifications

Highlights

  • Angle: 90°
  • Current: Max 5A
  • Operating Current: -45℃~+105℃
  • Suitable LED Strip Thickness: 0.2mm-0.3mm
  • Suitable LED Strip Width: 10mm

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote