Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

28PA51G – Rubber Wheel and Motor Kit with 12V Encoder Gear Motor

Rubber Wheel and Motor Kit with 12V Encoder Gear Motor

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
KIT0085
Manufacturer
DFRobot

DFRobot drivetrain kit for indoor mobile robots, combining a 12V encoder gear motor with two 136 mm rubber wheels for traction on varied surfaces.

Product overview

Overview. The DFRobot 28PA51G is a complete drivetrain kit for indoor mobile robots, combining a 12V DC gear motor with integrated encoder and a pair of 136 mm rubber wheels. The kit is supplied with both wheels and motor.

Main characteristics. The gear motor has a 51:1 gear ratio and a no-load speed of 146 rpm at 12V, with a rated torque of 10 kg.cm (139 oz.in). The no-load speed before the gearbox is 8000 rpm and the no-load current is 0.23 A at 12V. The stall current reaches 3.6 A and the weight is 270 g.

Encoder. The encoder provides 13 pulses per motor revolution and 663 pulses per gearbox shaft revolution, enabling fine angular measurement for closed-loop control and PID speed regulation.

Wheels. The rubber wheels have an outer diameter of 136 mm, a width of 24 mm and an inner bore diameter of 18 mm, providing grip suited to common indoor surfaces.

Dimensions. Overall size 123 x 36 x 36 mm.

Typical uses. This kit suits mobile robotics platforms, including home service robots and research prototypes, and integrates with controller boards such as Arduino, ESP32 or Raspberry Pi.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote