Maix Bit – Maix Bit AI development kit with K210 dual-core RISC-V, LCD and camera

Maix Bit AI development kit with K210 dual-core RISC-V, LCD and camera

Microcontroller Development Boards

  • RISC-V
Manufacturer part number
KIT0155
Manufacturer
DFRobot

DFRobot AI development board built around a dual-core RISC-V K210 processor, supplied with an LCD and an M12 camera. Intended for embedded vision and neural network inference.

Product overview

Overview. The DFRobot Maix Bit AI Development Kit (reference KIT0155) is a compact AI development kit built around the K210 processor, a dual-core 64-bit RISC-V architecture. The processor runs at a nominal frequency of 400 MHz, which can be overclocked to 600 MHz, and provides 6 MB of general memory and 2 MB of AI memory.

Main characteristics. The chip integrates an independent floating-point unit and a neural network accelerator delivering hundreds of GOPS. The manufacturer states a face detection speed of 6 frames with conventional algorithms, and an AI accelerator reaching more than 60 frames for OVGA and RGB images. Flash memory is 16 MB. The board measures 53.3 × 25.4 mm.

Interfaces and connectivity. A 24-pin DVP FPC connector is compatible with the OV2640, OV7740 and OV5640 sensors. A 24-pin FPC LCD connector supports an 8-bit MCU LCD. All GPIOs are connected to 2.54 mm headers. Debugging is available through UART and JTAG interfaces.

Camera and display. The kit includes an M12 camera with a 4 mm HD lens fitted with a 650 nm infrared cut filter, and an LCD screen.

Power and environment. The input voltage is 4.8 to 5.2 V, with an input current above 600 mA. Temperature rise is below 30 K. The operating temperature range is -30 to 85 °C.

Typical uses. The kit suits embedded computer vision, object and face detection, and prototyping of intelligent IoT sensing systems. The MaixPy firmware, based on MicroPython, and compatibility with OpenMV algorithms ease development. The product is available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote