MBT0046 – micro:bit STEM robot kit with line tracking and obstacle avoidance

micro:bit STEM robot kit with line tracking and obstacle avoidance

Robotics Kits, Motor Controllers & STEM Education

  • 0 - 1023
  • 5V
  • ±5cm
  • Supported
Manufacturer part number
MBT0046
Manufacturer
DFRobot
Data Range
0 - 1023
Expansion I2C Interfaces
2

DFRobot educational robot kit for micro:bit, designed for teaching programming and robotics, with line tracking and obstacle avoidance.

Product overview

Overview. The DFRobot Maqueen Lite V5 MBT0046 is a micro:bit compatible STEM robot kit designed for teaching programming, IoT and automation. It is an educational robot delivered fully assembled, with motors, battery box and wheels already installed.

Main characteristics. The robot includes a line-following algorithm embedded in its chip, with one preset line-following speed, accessible through a single program block. It has 3 sensors, 2 front RGB headlights (red, green, yellow, blue, purple, cyan, white) and 4 programmable WS2812 RGB LEDs covering the R255 x G255 x B255 colour spectrum. The sensor output is switch or analog, with a data range of 0 to 1023.

Motors and protection. The motors are N20 metal motors, fully enclosed and detachable for quick replacement. The robot supports reverse connection protection.

Interfaces and connectivity. The robot provides 2 servo motor ports, 2 expansion I2C interfaces and 3 expansion GPIO pins, plus an IO port with a 2.54 mm female header. A firmware upgrade interface is shared with the calibration button, and a buzzer with switch and an infrared receiver are integrated.

Power and environment. The robot operates from 3.5 V to 5 V DC, powered directly from 3 AA batteries (1.5 V alkaline or 1.2 V Ni-MH). The board has 6 threaded mounting points.

Typical uses. This kit suits introductory robotics and programming with micro:bit, line tracking, obstacle avoidance and automation projects in education. The I2C and GPIO expansion interfaces allow adding sensors or actuators.

Integration. The micro:bit controller connects to the robot, and the expansion pins and servo ports facilitate custom builds.

See all specifications

Highlights

  • Supply voltage: 5V
  • Accuracy: ±5cm
  • Batteries: 3x AA (1.5V Alkaline or 1.2V Ni-MH)
  • Buzzer with Switch: 1
  • Calibration Button: 1 (Shared with Firmware Upgrade)
  • Data Range: 0 - 1023

Good to know before integrating

  • Power: plan for a supply compatible with 5V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote