TD-8125MG – 6 DOF desktop robotic arm with 25 kg digital servos

6 DOF desktop robotic arm with 25 kg digital servos

Desktop Robot Arms

  • DC 4.4V-8.4V
  • >2000mA
  • 40mA
  • Metal Rolling Bearings
Manufacturer part number
ROB0036
Manufacturer
DFRobot
Power Supply Range
DC 4.4V-8.4V
No-load current
Typical 210mA, Maximum 260mA

TD-8125MG desktop robotic arm from DFRobot, with 6 degrees of freedom and digital servos, delivered fully assembled for teaching, experiments and automation.

Product overview

Overview. The DFRobot TD-8125MG desktop robotic arm (reference ROB0036) is an educational 6 degrees of freedom robotic arm, version 2, delivered fully assembled and calibrated at the factory. It is designed for scientific experimentation, kinematics learning and automation control exploration.

Main characteristics. The arm offers 6 degrees of freedom and a 270 degree rotation angle. Its digital servos have a typical stall torque of 23.5 kg.cm, up to 26.8 kg.cm at maximum. Mechanical parts are 2 mm aluminium alloy with brushed oxidation finish, and the gripper parts are 3 mm aluminium alloy. Joint rotation points use metal rolling bearings and the servo horns are aluminium alloy. The product weighs 950 g (±100 g) and measures approximately 37 cm × 11 cm × 12 cm with the arm extended to its farthest end.

Power and consumption. The rated voltage is 5 V and the power supply range is DC 4.4 V to 8.4 V. No-load current is typically 210 mA, with a maximum of 260 mA, and static current is 40 mA. Stall current is typically 2600 mA and up to 3400 mA at maximum. Power consumption is above 2000 mA.

Control. The PWM control range runs from 500 µs to 2500 µs (0 to 270 degrees), with a midpoint of 1500 µs.

Typical uses. This arm suits robotics teaching, kinematics practical work and automation control tests on the bench.

See all specifications

Highlights

  • Arm Part Material: 2mm Aluminum Alloy/Brushed Oxidation/Natural Color
  • Bearings: Metal Rolling Bearings
  • Degrees of Freedom: 6 degrees of freedom
  • Gripper Part Material: 3mm Aluminum Alloy/Sandblasted Oxidation/Natural Color
  • Installation Status: Fully installed
  • Model: TD-8125MG

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Desktop Robot Arms
Request a quote