Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

URM37 – Ultrasonic distance sensor with RS232 and UART output

Ultrasonic distance sensor with RS232 and UART output

Ultrasonic Sensors

  • RS-485
  • RS-232
Manufacturer part number
SEN0001
Manufacturer
DFRobot

DFRobot URM37 ultrasonic distance measurement sensor module with temperature compensation and RS232 or TTL serial, analog and PWM outputs.

Product overview

Overview. The DFRobot URM37 V5.0 is an ultrasonic distance sensor with built-in temperature compensation, designed to measure distance accurately in applications where temperature changes.

Main characteristics. Detecting range from 2 cm to 800 cm (ultimate range 1000 cm), accuracy of 1%, resolution of 1 cm and a measuring period below 100 ms at most. The module operates from 3.3 V to 5.5 V with an operating current of 20 mA.

Interfaces and connectivity. The module offers several outputs: analog (voltage proportional to distance), switch, serial (RS232 or TTL level selectable by button after reboot) and PWM. The RS232 serial level provides higher reliability and allows direct communication with a computer serial port.

Power and environment. Working temperature range from -10 °C to 70 °C. Dimensions 22 mm × 51 mm for a weight of about 25 g.

Typical uses. In proximity mode, the module can serve as an ultrasonic proximity switch: the COMP/Trig pin outputs a low level when the measured distance is smaller than a preset value. Connected to an external servo, it can form a spatial ultrasonic scanner.

Integration. Compatible with Arduino, Raspberry Pi and LattePanda. Mechanical dimensions, pin interface and communication commands are compatible with V4.0.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Ultrasonic Sensors
Request a quote