SEN0202
3D Gesture Sensor Module, I2C, 6 Gestures, 0-10 cm

- Operating Temperature
- - 20 ℃ ~ + 85 ℃
- Distance Induction Range
- 10cm
- Gesture Detection Range
- 5cm
- Wide operating voltage range
- 3.3 V – 5 V
3D Gesture Sensor Module, I2C, 6 Gestures, 0-10 cm
Educational STEM Coding & Sensor Starter Packs
DFRobot 3D gesture sensor module based on GestIC technology, for short-range touchless control and human-machine interfaces on embedded systems and IoT prototypes.
Overview. The DFRobot SEN0202 is a compact 3D gesture sensor built around the Microchip MGC3X30 controller and GestIC® technology. It interprets natural hand and finger movements in the air for touchless control of embedded systems and connected devices.
Main characteristics. Gesture detection operates at approximately 5 cm and distance sensing extends up to 10 cm. The spatial resolution is 150 dpi, allowing detection of subtle finger movements. Dimensions are 72 x 54 mm.
Connectivity. The module communicates over an I2C interface, with I2C address 0x42.
Power and environment. The operating voltage ranges from 3.3 V to 5 V, and the operating temperature range is - 20 ℃ to + 85 ℃.
Typical uses. Touchless control, compact human-machine interfaces, educational and electronics prototyping projects, as an alternative to buttons and touch panels.
Integration. A simple I2C connection to a microcontroller board is enough to use the recognised gestures.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0202, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 72 x 54 mm / 2.83 x 2.12" |
| Distance Induction Range | 10cm |
| Gesture Detection Range | 5cm |
| I2C Address | 0x42 |
| Interface Type | I2C |
| Operating Temperature | - 20 ℃ ~ + 85 ℃ |
| Operating Voltage | 3.3 - 5V |
| Spatial Resolution | 150 dpi |
| Wide operating voltage range | 3.3 V – 5 V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0202. For a missing document or a specific revision, our experts send it to you.
DFRobot 3D gesture sensor module based on GestIC technology, for short-range touchless control and human-machine interfaces on embedded systems and IoT prototypes.
| Parameter | Value |
|---|---|
| Dimensions | 72 x 54 mm / 2.83 x 2.12" |
| Distance Induction Range | 10cm |
| Gesture Detection Range | 5cm |
| I2C Address | 0x42 |
| Interface Type | I2C |
| Operating Temperature | - 20 ℃ ~ + 85 ℃ |
| Operating Voltage | 3.3 - 5V |
| Spatial Resolution | 150 dpi |
| Wide operating voltage range | 3.3 V – 5 V |
Points to check before using SEN0202 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 3.3 - 5V |
| Wide operating voltage range | 3.3 V – 5 V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0202 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "I2C Address": 0x42.
- 20 ℃ ~ + 85 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
3D Gesture Sensor Module, I2C, 6 Gestures, 0-10 cm

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0202 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details