Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

A01NYUB – Waterproof Ultrasonic Distance Sensor with UART Output, IP67

Waterproof Ultrasonic Distance Sensor with UART Output, IP67

Ultrasonic Sensors

Manufacturer part number
SEN0313
Manufacturer
DFRobot

The A01NYUB waterproof ultrasonic distance sensor from DFRobot measures distances from 28 to 750 cm with UART output, for integration into obstacle and proximity detection systems.

Product overview

Overview. The A01NYUB waterproof ultrasonic distance sensor from DFRobot (reference SEN0313) measures the distance to a target by timing the round trip of an ultrasonic pulse. It is designed for a detection range of 28 to 750 cm on a flat object.

Main characteristics. Accuracy is ±1 cm with 1 mm resolution and a response time of 100 ms. The blind zone is 28 cm. The sensing angle is 55° with the removable bell-mouth, and 40° without it. The probe center frequency is 40K±1.0KHZ.

Interfaces and connectivity. The output is UART at a baud rate of 9600 bit/s. The sensor delivers the distance value directly to a host or microcontroller, with all signal processing integrated in the module.

Power and environment. Operating voltage of 3.3 to 5 V, average current below 15 mA. Operating temperature from -15 to 60 °C, storage temperature from -25 to 80 °C. Waterproof grade IP67.

Typical uses. Backing car annunciators, obstacle avoidance robots and object approach detection, used with an Arduino controller.

Integration. The sensor ships with a PH2.0-4P connector.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Ultrasonic Sensors
Request a quote