Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0348 – Capacitive UART Fingerprint Sensor, 80 Fingerprints

Capacitive UART Fingerprint Sensor, 80 Fingerprints

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
SEN0348
Manufacturer
DFRobot

DFRobot SEN0348 capacitive fingerprint sensor built around the ID809 processor, with UART interface and storage for 80 fingerprints. Used for fingerprint door locks and identity verification.

Product overview

Overview. The DFRobot SEN0348 is a biometric recognition module built around the ID809 processor and a semiconductor fingerprint sensor. It uses the built-in IDfinger 6.0 algorithm to carry out all fingerprint identification tasks independently: image capture, processing, storage and comparison.

Main characteristics. The sensor supports 360-degree fingerprint entry and matching at any finger angle, along with a self-learning function. Its 8.0 mm x 8.0 mm detection area has 160 x 160 pixels, giving a pixel resolution of 508 dpi. The 1:1 verification time is 300 to 400 ms and storage capacity is 80 fingerprints.

Interfaces and connectivity. Communication is via UART. Used with the Arduino library, the module can implement fingerprint registration and deletion. Upper computer software is provided to operate the sensor.

Power and environment. The module operates at 3.3 V with an operating current below 60 mA. It is rated for an operating environment of -40 to 60 °C and a relative humidity below 90 %. Its dimensions are 21 mm in diameter and 6 mm in height.

Typical uses. This sensor suits fingerprint door locks, drawer locks, identity recognition systems and authorization devices.

Integration. The module ships with a PH1.0 6-pin cable and is certified CE and RoHS.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote