SEN0503
Infrared break-beam sensor 50 cm, through-beam type

- Output Current
- 100mA (can directly drive the relay)
- Working current
- 25mA
- Dimensions
- 20*10*9mm (L*W*H)
- Response time
- 2ms
Infrared break-beam sensor 50 cm, through-beam type
Educational STEM Coding & Sensor Starter Packs
Through-beam infrared break-beam sensor from DFRobot, reference SEN0503, for presence and motion detection up to 50 cm, with an NPN normally open output.
Overview. The DFRobot SEN0503 infrared break-beam sensor is a through-beam detector made of a separate emitter and receiver. It detects an object opaque to infrared light when it breaks the beam, with an induction distance of 50 cm at 5 V and 20 cm at 3.3 V.
Main characteristics. The response time is 2 ms. The receiver has a receiving angle below 10°, and the emitter sends a straight infrared beam. The module measures 20 × 10 × 9 mm and has a 3 mm light hole, allowing installation in a narrow space. The cable length is 25 cm.
Interfaces and connectivity. The output is NPN normally open, with a 100 mA output current that can directly drive a relay. The receiver uses a red wire for 5 V DC, a black wire for GND and a white wire for OUT. The transmitter uses a red wire for 5 V DC and a black wire for GND.
Power and environment. The working voltage is DC 3.0 to 5 V, with a working current of 25 mA. The working temperature range is -25 °C to 60 °C. The product is intended for indoor use and is not waterproof.
Typical uses. The sensor suits simple motion detection, speed detection and timing, for example in Arduino projects or robotics competitions.
Integration. It connects directly to an Arduino board or to any controller accepting an NPN input. The kit includes one transmitter and one receiver.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0503, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 20*10*9mm (L*W*H) |
| Response time | 2ms |
| Cable Length | 25cm / 9.84 inch |
| Emitting Angle | straight line (infrared light) |
| Induction Distance | 50CM / (5V), 20CM / (3.3V) |
| Induction Method | through-beam type (non-transparent) |
| Light Hole | 3MM / 0.12 inch |
| Output Current | 100mA (can directly drive the relay) |
| Output mode | NPN normally open |
| Receiving | red wire =5V DC, black wire=GND, white wire=OUT (NPN) |
| Receiving Angle | <10° |
| Transmitter | red wire=5V DC, black wire=GND |
| Working current | 25mA |
| Working Environment | indoor (not waterproof) |
| Working temperature | -25°C ~ 60°C |
| Working voltage | DC 3.0 V-5V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0503. For a missing document or a specific revision, our experts send it to you.
Through-beam infrared break-beam sensor from DFRobot, reference SEN0503, for presence and motion detection up to 50 cm, with an NPN normally open output.
| Parameter | Value |
|---|---|
| Dimensions | 20*10*9mm (L*W*H) |
| Response time | 2ms |
| Cable Length | 25cm / 9.84 inch |
| Emitting Angle | straight line (infrared light) |
| Induction Distance | 50CM / (5V), 20CM / (3.3V) |
| Induction Method | through-beam type (non-transparent) |
| Light Hole | 3MM / 0.12 inch |
| Output Current | 100mA (can directly drive the relay) |
| Output mode | NPN normally open |
| Receiving | red wire =5V DC, black wire=GND, white wire=OUT (NPN) |
| Receiving Angle | <10° |
| Transmitter | red wire=5V DC, black wire=GND |
| Working current | 25mA |
| Working Environment | indoor (not waterproof) |
| Working temperature | -25°C ~ 60°C |
| Working voltage | DC 3.0 V-5V |
Answers to the questions that the recorded characteristics of SEN0503 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Output Current": 100mA (can directly drive the relay).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Infrared break-beam sensor 50 cm, through-beam type

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0503 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details