SEN0507
Industrial Capacitive Liquid Level Sensor for High-Viscosity Liquids

- Power Supply Voltage
- 12-24V
- Output Current
- Max100mA
- Appearance Material
- PEEK/316 stainless steel
- Detection Mode
- Contact detection
Industrial Capacitive Liquid Level Sensor for High-Viscosity Liquids
DFRobot SEN0507 contact-type capacitive level sensor for detecting high-viscosity, low-corrosive liquids such as glue, lubricating oil, grease or ink.
Overview. The DFRobot SEN0507 is a contact-type capacitive liquid level sensor designed to detect high-viscosity, low-corrosive liquids such as glue, lubricating oil, grease, ink, engine oil or powders. Detection is based on measuring the capacitance of the liquid, which also allows different liquids to be distinguished.
Main characteristics. Sensitivity is adjusted with a knob (clockwise to increase, counterclockwise to decrease) to suit different media. A conical anti-hanging-liquid head reduces liquid retention on the probe. An indicator light reports the sensor status in real time. Response speed is 20 ms and the switch output frequency is 50 Hz.
Interfaces and connectivity. NPN+PNP dual output, maximum output current 100 mA. Wiring: brown for positive, blue for negative, black for NPN output, white for PNP output.
Power and environment. Power supply voltage 12-24 V, working power below 0.5 W. Working temperature range -25°C to +80°C, protection level IP65. Polarity protection and over-current protection included.
Materials and installation. PEEK head, 316 stainless steel housing, standard M12×1 thread for easy installation.
Typical uses. Level detection of high-viscosity, low-corrosive liquids in industrial environments, with direct connection to a PLC or switching input thanks to the NPN and PNP outputs.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0507, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Appearance Material | PEEK/316 stainless steel |
| Detection Mode | Contact detection |
| Detection Object | High viscosity and low corrosive liquid |
| Detection Principle | Capacitive detection |
| Output Current | Max100mA |
| Output signal | NPN+PNP Dual Output |
| Power Supply Voltage | 12-24V |
| Protection Level | IP65 |
| Protection Mechanism | Polarity protection, over-current protection |
| Speed | Response speed is 20ms, switch output frequency is 50Hz |
| Wiring Instructions | Brown-positive, blue-negative, black-NPN, white-PNP |
| Working Power | <0.5W |
| Working temperature | -25°C~+80°C |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0507. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0507 contact-type capacitive level sensor for detecting high-viscosity, low-corrosive liquids such as glue, lubricating oil, grease or ink.
| Parameter | Value |
|---|---|
| Appearance Material | PEEK/316 stainless steel |
| Detection Mode | Contact detection |
| Detection Object | High viscosity and low corrosive liquid |
| Detection Principle | Capacitive detection |
| Output Current | Max100mA |
| Output signal | NPN+PNP Dual Output |
| Power Supply Voltage | 12-24V |
| Protection Level | IP65 |
| Protection Mechanism | Polarity protection, over-current protection |
| Speed | Response speed is 20ms, switch output frequency is 50Hz |
| Wiring Instructions | Brown-positive, blue-negative, black-NPN, white-PNP |
| Working Power | <0.5W |
| Working temperature | -25°C~+80°C |
Points to check before using SEN0507 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Output Current | Max100mA |
| Power Supply Voltage | 12-24V |
| Working Power | <0.5W |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0507 can answer. A question is not asked when nothing is recorded to answer it.
12-24V (source: Power Supply Voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial Capacitive Liquid Level Sensor for High-Viscosity Liquids

WSR550 76-81GHz Radar level transmitter

WSR200 80G Radar level meter

SUP-P262-B PTFE Submersible level meter

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0507 |
| Manufacturer | DFRobot |
Level Transmitters
Liquid Level Sensor for Water Level, Oil Level and Mild-corrosive Liquid Level Monitoring
Price on request
Level Transmitters
60 GHz Radar Level Sensor with RS485 MODBUS RTU Output
Price on request
Level Transmitters
Deep-water level transmitter with 4-20 mA output · Ref. : MPM426WS
Price on request
Level Transmitters
Wireless ceiling-mounted light level sensor · Ref. : LIGHT-LEVEL-SENSOR-ELLSU-OEM
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details