SEN0523 – IR Break-Beam Photoelectric Sensor 4 m

IR Break-Beam Photoelectric Sensor 4 m

Educational STEM Coding & Sensor Starter Packs

  • -10~+60°C
  • 4m
  • 30mA
  • -20~+80°C
Manufacturer part number
SEN0523
Manufacturer
DFRobot
Operating Temperature
-10~+60°C
Sensing Range
4m

DFRobot SEN0523 IR break-beam photoelectric sensor for simple motion detection, speed detection and timing over 4 m, including with Arduino.

Product overview

Overview. The DFRobot SEN0523 is a 5V IR Photoelectric Switch operating as an infrared break-beam sensor. An emitter and a receiver placed face to face detect the passage of an object that is not transparent to infrared. The beam has a wavelength of 830 nm and is invisible to the human eye.

Main characteristics. Sensing range of 4 m in thru-beam mode (non-transparent objects), response time of 0.5 ms, straight-line emitting angle and receiving angle of ±5°. The module is small in size and can be installed in narrow spaces.

Power and environment. Operating voltage of DC 5 V, output current of 30 mA and output power of 100 mW. Operating temperature from -10 to +60 °C and storage temperature from -20 to +80 °C.

Wiring. Transmitter: red wire 5 V, black wire GND, green wire floating. Receiver: red wire 5 V, black wire GND, blue wire output. The transmitter is on a green PCB and the receiver on a black PCB.

Typical uses. Simple motion detection, speed detection and timing, notably in educational robotics projects and smart robot competitions programmed with Arduino.

See all specifications

Highlights

  • Response time: 0.5ms
  • Emitting Angle: straight line (infrared light)
  • Operating Temperature: -10~+60°C
  • Operating Voltage: DC 5V
  • Output Current: 30mA
  • Output power: 100mW

Good to know before integrating

  • Thermal: rated operating range -10~+60°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote