SEN0563
Formaldehyde MEMS sensor, breakout, 0-3 ppm range

- Operating Temperature
- -10-50℃
- Detection range
- 0-3ppm
- Operating Current
- <20mA
- Dimension
- 13×13 x 2.5mm/ 0.0.51×0.51x0.1"
Formaldehyde MEMS sensor, breakout, 0-3 ppm range
The DFRobot SEN0563 is a MEMS formaldehyde (HCHO) sensor in breakout format, measuring from 0 to 3 ppm with an analog voltage output. It is intended for indoor air quality monitoring.
DFRobot SEN0563, formaldehyde (HCHO) sensor in breakout format — The SEN0563 is a MEMS-based formaldehyde sensor measuring HCHO concentrations from 0 to 3 ppm and providing an analog voltage output signal.
Main characteristics. Gas detected: formaldehyde (HCHO). Detection range: 0-3 ppm. Sensitivity: R0 (in air) / Rs (in 0.4 ppm HCHO) ≥ 1.8. Dimensions: 13×13×2.5 mm. Lifespan: ≥ 3 years (in air).
Power supply and consumption. Operating voltage: 3.3-5 V. Operating current: below 20 mA, suited to battery-operated devices.
Environmental conditions. Operating temperature: -10 to 50 ℃. Operating humidity: 15-90 %RH (non-condensing).
Typical uses. Air purifiers, HVAC systems, portable detectors and smart wearables, including Arduino and Raspberry Pi projects thanks to the analog output.
Integration. The analog output connects directly to an analog input of a microcontroller or development board. Remove the protective film before use, avoid exposure to volatile silicon compound vapours and corrosive gases, and preheat the module for at least 24 hours after a long period of non-use. The module must not be used in systems involving personal safety.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0563, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Detection range | 0-3ppm |
| Dimension | 13×13 x 2.5mm/ 0.0.51×0.51x0.1" |
| Fermion | Formaldehyde Sensor (Breakout, 0-3ppm MEMS HCHO Detection, Low Power) |
| Gas detected | Formaldehyde (HCHO) |
| Lifespan | ≥3 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 3.3-5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 0.4ppm HCHO) ≥ 1.8 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0563. For a missing document or a specific revision, our experts send it to you.
The DFRobot SEN0563 is a MEMS formaldehyde (HCHO) sensor in breakout format, measuring from 0 to 3 ppm with an analog voltage output. It is intended for indoor air quality monitoring.
| Parameter | Value |
|---|---|
| Detection range | 0-3ppm |
| Dimension | 13×13 x 2.5mm/ 0.0.51×0.51x0.1" |
| Fermion | Formaldehyde Sensor (Breakout, 0-3ppm MEMS HCHO Detection, Low Power) |
| Gas detected | Formaldehyde (HCHO) |
| Lifespan | ≥3 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 3.3-5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 0.4ppm HCHO) ≥ 1.8 |
Points to check before using SEN0563 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | <20mA |
| Operating Voltage | 3.3-5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0563 can answer. A question is not asked when nothing is recorded to answer it.
-10-50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Formaldehyde MEMS sensor, breakout, 0-3 ppm range

Explosion-proof Formaldehyde Detector Gas Sensor

Formaldehyde Sensor


Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0563 |
| Manufacturer | DFRobot |
Formaldehyde Sensors
Digital formaldehyde (HCHO) sensor with I²C interface · Ref. : IAGM1
Price on request
Formaldehyde Sensors
4-in-1 Indoor Air Quality Monitor with Touchscreen, HCHO and TVOC · Ref. : SFD-02
Price on request
Formaldehyde Sensors
Electrochemical formaldehyde CH2O sensor, UART output · Ref. : ZE510-CH2O
Price on request
Formaldehyde Sensors
Electrochemical formaldehyde sensor with RS485 and analog outputs · Ref. : FORMALDEHYDE-SENSOR
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details