SEN0566 – MEMS VOC Gas Sensor, Qualitative Detection, 1-500 ppm

MEMS VOC Gas Sensor, Qualitative Detection, 1-500 ppm

VOC Sensors

  • -10-50℃
  • 1-500ppm
  • <20mA
  • ≥5 years (in air)
Manufacturer part number
SEN0566
Manufacturer
DFRobot
Operating Temperature
-10-50℃
Detection range
1-500ppm

MEMS volatile organic compounds sensor for indoor air quality monitoring and gas detection in compact modules. Available on quotation from Atlas Electronics.

Product overview

Overview. The DFRobot SEN0566 is a volatile organic compounds (VOC) detector based on MEMS technology, supplied as a breakout module. Its detection range is 1 to 500 ppm. It provides qualitative measurements only.

Main characteristics. Dimensions of 13×13 mm with a thickness of 2.5 mm. Operating current below 20 mA. Analog voltage output, supply voltage of 3.3 to 5 V. Sensitivity R0 (in air) / Rs (in 50 ppm ethanol) of 3 or more. Lifespan of 5 years or more in air.

Detected gases and uses. The sensor detects ethanol, formaldehyde and toluene, among others. It can be used to measure formaldehyde concentration in indoor air, to identify the sources and levels of benzene in ambient air, and to detect leaks or spills of tetrachloroethylene in industrial safety contexts.

Operating conditions. Operating temperature of -10 to 50 °C and humidity of 15 to 90 %RH, non-condensing. The protective film should be removed before use. Avoid volatile silicon compound vapours, high concentrations of corrosive gases, contact with water or condensation, and excessive vibration. For extended periods without use, preheat the module for at least 24 hours. The manufacturer specifies that this module must not be used in systems involving personal safety.

See all specifications

Highlights

  • Detection range: 1-500ppm
  • Dimension: 13×13 x 2.5mm/0.0.51×0.51x0.1"
  • Environmental Monitoring: identify the sources and levels of benzene in the ambient air
  • Gas detected: ethanol, formaldehyde, toluene, etc
  • Indoor air quality: measure the concentration of formaldehyde in the indoor air
  • Industrial safety: detect any leaks or spills of tetrachloroethylene

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -10-50℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All VOC Sensors
Request a quote