LPB60B – IP65 DToF Single-Point LiDAR Sensor 60 m UART

IP65 DToF Single-Point LiDAR Sensor 60 m UART

LiDAR Sensors

  • -40°C to 85°C
  • UART
  • <130mA@5V
  • ±5cm
Manufacturer part number
SEN0587
Manufacturer
DFRobot
Operating Temperature
-40°C to 85°C
Communication interface
UART

The DFRobot LPB60B is a single-point LiDAR sensor measuring distances up to 60 m with ±5 cm accuracy and UART output. It is intended for drone altitude hold, vehicle collision avoidance and intelligent transportation.

Product overview

Overview. The DFRobot LPB60B is a single-point LiDAR sensor based on the direct time-of-flight (DToF) principle, operating at 905 nm. It measures distances up to 60 m indoors and outdoors, and remains stable under ambient light of 100 klux.

Main characteristics. Measurement accuracy is ±5 cm, with a resolution of 1.5 cm. The measurement frequency is adjustable from 1 to 2000 Hz, with a default of 100 Hz. The laser emission angle is 0.17° and the reception field of view is 2.2°. The measurement range is 0.05 to 60 m for a target with 90% reflectivity, and 0.05 to 24 m for a target with 10% reflectivity.

Interfaces and connectivity. The sensor provides a UART communication interface. Pinout: red for VCC, green for RX, white for TX and black for GND.

Power and environment. It operates at 5 V with a power consumption below 130 mA at 5 V. Its protection level is IP65 and its operating temperature ranges from -40 °C to 85 °C. Weight is 43 g.

Typical uses. Applications cited by the manufacturer include drone altitude hold, drone follow-up, vehicle collision avoidance, vehicle flow detection, outdoor parking space inspection, gate detection and level granary testing.

Integration. The module can be used with an Arduino IO expansion board. It includes protection against reverse connection, overvoltage and current limitation.

See all specifications

Highlights

  • Ambient light immunity: 100klux
  • Communication interface: UART
  • Laser Emission Angle: 0.17°
  • Measurement Accuracy: ±5cm
  • Measurement Frequency: Adjustable from 1 to 2000Hz (default is 100Hz)
  • Operating Temperature: -40°C to 85°C

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40°C to 85°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote