SEN0596 – Carbon Monoxide Threshold Alarm Sensor 0-1000 ppm

Carbon Monoxide Threshold Alarm Sensor 0-1000 ppm

Educational STEM Coding & Sensor Starter Packs

  • CE/ROHS certified
Manufacturer part number
SEN0596
Manufacturer
DFRobot
Operating Range
-10°C~50°C | 15%~90% RH
Compliance
CE/ROHS certified

The DFRobot SEN0596 is a carbon monoxide threshold alarm sensor with a fixed 20 ppm threshold and a high/low output signal to flag a danger condition.

Product overview

DFRobot SEN0596 carbon monoxide sensor. The DFRobot SEN0596 is a carbon monoxide threshold alarm sensor designed to signal when CO concentration exceeds 20 ppm over a measuring range of 0 to 1000 ppm.

Detection and threshold. The sensor detects carbon monoxide over a range of 0 to 1000 ppm and triggers its signal above the 20 ppm threshold. Response time is under 15 seconds at the 20 ppm threshold. An indicator light shows the sensor status.

Output signal. The output goes high at 5 to 24 V in case of danger and stays at 0 V when safe, allowing direct reading by a PLC or a control circuit.

Power and consumption. The sensor runs on 5 to 24 V DC. It draws under 10 mA in standby and under 100 mA when alerting.

Environmental conditions. The sensor operates from -10 °C to 50 °C at 15 % to 90 % RH. Its lifetime is 8 years in normal air conditions.

Compliance. The product is CE and RoHS certified.

Typical uses. Its high/low logic output integrates into an alarm chain or a control system to trigger signalling or a safety shutdown.

See all specifications

Highlights

  • Response time: <15 seconds at 20ppm threshold
  • Compliance: CE/ROHS certified
  • Detection Gas: Carbon Monoxide (0-1000ppm max)
  • Lifetime: 8 years in normal air conditions
  • Operating Range: -10°C~50°C | 15%~90% RH
  • Output signal: High=5-24V (danger), Low=0V (safe)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote