BMV080 – PM1/PM2.5/PM10 Air Quality Sensor Breakout Board, I2C/SPI

PM1/PM2.5/PM10 Air Quality Sensor Breakout Board, I2C/SPI

Particulate Matter Sensors

  • 0 ~ 1000 μg/m³
  • 6μA @3.3V
  • 24×20×4.24 mm
  • 2.0 mm
Manufacturer part number
SEN0663
Manufacturer
DFRobot
PM2.5 Measurement Range
0 ~ 1000 μg/m³
Communication interface
2.54-7P Pin Header Socket

DFRobot BMV080 breakout board measuring PM1, PM2.5 and PM10 particulate concentrations by laser scattering, without a fan, with I2C and SPI interfaces. Intended for embedded air quality monitoring.

Product overview

Overview. The DFRobot BMV080 is a PM1, PM2.5 and PM10 particulate sensor on a 24 × 20 mm breakout board, built around the Bosch BMV080 module. It measures particles by laser scattering without a fan.

Main characteristics. The PM2.5 measurement range runs from 0 to 1000 μg/m³, with an output resolution of 1 μg/m³ and an accuracy of ±10 μg/m³ from 0 to 100 μg/m³, then ±10% from 101 to 1000 μg/m³. The minimum detectable particle size is 0.5 μm. The sensor offers a continuous measurement mode and a periodic measurement mode.

Interfaces and connectivity. Communication is via I2C or SPI through a 2.54-7P pin header socket. The default I2C address is 0x57, with 0x54, 0x55 and 0x56 also available.

Power and environment. The sensor operates from DC 3.3 V with a current of 70 mA in continuous measurement mode and a sleep current of 6 μA at 3.3 V. Start-up time is 1.2 s and stabilization time is 10 s. Condensation is not allowed on the laser diode. The laser is Class 1, complying with IEC 60825-1.

Typical uses. Embedded air quality monitoring in portable equipment or battery-powered IoT nodes, thanks to its very low consumption.

Integration. Mounting holes with a 2.0 mm inner diameter are spaced 19 mm apart.

See all specifications

Highlights

  • Dimensions: 24×20×4.24 mm
  • Communication interface: 2.54-7P Pin Header Socket
  • Communication Method: I2C / SPI
  • Condensation: Not allowed on the laser diode
  • Fermion: BMV080 Air Quality Sensor (Breakout, PM1/PM2.5/PM10, I2C/SPI)
  • I2C Address: 0x57 (Default) / 0x54 / 0x55 / 0x56

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote