Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0677 – Offline AI Binocular 3D Vision Sensor

Offline AI Binocular 3D Vision Sensor

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
SEN0677
Manufacturer
DFRobot

Standalone multi-modal biometric recognition module (face, palm vein, QR code) with onboard AI processing, 3D liveness detection and UART interface, intended for access control and embedded systems.

Product overview

DFRobot SEN0677 is an offline AI binocular vision sensor, a standalone face recognition sensor combining two cameras (RGB and infrared) and an onboard AI processor that perform all computations locally without host processing. It provides three identification modes: deep learning face recognition, palm vein recognition and QR code decoding.

Security. The sensor uses binocular vision to capture 3D depth information and applies liveness detection that distinguishes a live person from a two-dimensional representation. The stated False Acceptance Rate (FAR) is 0.001% and the pass rate is 98.85%.

Main characteristics. Local storage for 1,000 faces and 1,000 palm vein templates. Diagonal field of view of 83°, optimal focus distance of 60 cm, detection range of 30 to 120 cm for faces and 15 cm for palm vein and QR code. Recognition angle of ±20° pitch and yaw, with multi-angle enrollment. Infrared illumination at 850 nm and RGB illumination at 650 nm over 90°. Boot time of 900 ms to 2.5 s depending on the number of stored users.

Interfaces and connectivity. UART communication at 115200 baud and USB video transmission over UVC with MJPEG output; expandable to UAC for audio and to H.264 or YUY2 for video. Expandable audio I/O (speaker and microphone).

Power and environment. Supply voltage of 5 to 12 V, operating current of 320 to 330 mA at 8 V, standby current of 120 to 130 mA in auto-detection mode and 0 µA shutdown current in non-auto-detection mode. Operating temperature from -20 °C to +60 °C, storage from -30 °C to +70 °C, humidity 10 to 93% RH non-condensing. Dimensions 57.8 × 20 × 10.12 mm.

Typical uses. Secure access control, smart home devices and self-service terminals, where the UART interface allows integration with a microcontroller or embedded system.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote