Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0709 – RS485 ModBus-RTU IP68 ORP Water Quality Sensor

RS485 ModBus-RTU IP68 ORP Water Quality Sensor

pH and Conductivity Analyzers

  • RS-485
  • Modbus
Manufacturer part number
SEN0709
Manufacturer
DFRobot

Industrial ORP (oxidation-reduction potential) sensor for water quality analysis, with RS485 ModBus-RTU interface and IP68 rating for continuous submersion.

Product overview

Overview. The DFRobot SEN0709 is an industrial-grade water quality ORP sensor measuring oxidation-reduction potential from -1999 to 1999 mV with 1 mV resolution and ±5 mV accuracy. The probe and housing form an integrated unit.

Main characteristics. The sensor includes a built-in temperature sensor providing automatic temperature compensation over a range of 0°C to +60°C. Each unit is factory calibrated and ready for immediate use. Two-point electrode calibration is supported through register settings to maintain accuracy over time.

Interfaces and connectivity. The sensor communicates over RS485 using the standard ModBus-RTU protocol. Compatibility tutorials for Arduino boards and DFRobot LoRaWAN systems are available.

Power and environment. Power supply of 10 to 30 V DC, power consumption of 0.4 W. IP68 waterproof rating, pressure resistance of 0.6 MPa, operating temperature of 0°C to +80°C. Corrosion-resistant plastic housing, 5 m cable.

Typical uses. Continuous water quality monitoring in industrial environments, with measurements sent to PLCs or Arduino boards over the ModBus-RTU link.

Maintenance. The probe ships with a protective cap containing a preservation solution (3.3 mol/L KCl). Minor white crystalline deposits around the cap are normal and dissolve back into the preservation liquid.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote