Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0710 – RS485 Industrial Water Turbidity Sensor 0-1000 NTU

RS485 Industrial Water Turbidity Sensor 0-1000 NTU

pH and Conductivity Analyzers

  • RS-485
Manufacturer part number
SEN0710
Manufacturer
DFRobot

DFRobot industrial water turbidity sensor using 90° light scattering measurement, for continuous water quality monitoring.

Product overview

Overview. The SEN0710 water turbidity sensor from DFRobot is an industrial RS485 sensor based on the 90° light scattering measurement principle. Its probe and housing form a single compact unit that is simple to use.

Measurement characteristics. The measurement range is 0 to 1000 NTU, with a resolution of 0.1 NTU and an accuracy of ±5% FS. The light source is an infrared LED combined with a fiber optic light path, and a filtering algorithm provides strong resistance to external light interference. Response time is ≤30 s. Built-in temperature compensation over a range of 0°C to +60°C.

Communication and connectivity. RS485 interface supporting the standard Modbus-RTU protocol, for integration into a PLC or supervision system. 5 m cable. Tutorials for connection to an Arduino board and to DFRobot LoRaWAN modules are provided.

Power and environment. Power supply 10 to 30 V DC, power consumption 0.2 W. Corrosion-resistant plastic housing, IP68 waterproof rating and 0.6 MPa pressure resistance. Operating temperature 0°C to +40°C.

Typical uses. Drinking water monitoring, wastewater treatment, river and lake monitoring.

Implementation. The sensor is factory calibrated and ready to use. Two-point electrode calibration via registers is available after prolonged use. Maintain a clearance of at least 5 cm from surrounding walls and a 7 cm obstacle-free zone directly below the probe, and avoid areas with active air bubbles.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote