Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0711 – Ammonia Nitrogen and pH Water Sensor, RS485 Modbus-RTU

Ammonia Nitrogen and pH Water Sensor, RS485 Modbus-RTU

pH and Conductivity Analyzers

  • RS-485
  • Modbus
Manufacturer part number
SEN0711
Manufacturer
DFRobot

Industrial DFRobot SEN0711 sensor for measuring ammonia nitrogen in water, with automatic pH and temperature compensation and RS485 Modbus-RTU output.

Product overview

Overview. The DFRobot SEN0711 industrial sensor measures ammonia nitrogen and pH in water, including free ammonia (NH3) and ammonium ions (NH4+), within a range of 0 to 100 mg/L.

Measurement characteristics. Measurement range of 0 to 100 mg/L, resolution of 0.01 mg/L, accuracy of ±3% FS and repeatability error of 1%. Response time is less than 30 s. The sensor provides automatic pH and temperature compensation, with a temperature compensation range of 0°C to +60°C.

Interfaces and connectivity. RS485 interface supporting the standard ModBus-RTU protocol, for connection to a PLC or supervisory system. A 5 m cable is included.

Power and environment. Power supply of 10 to 30 V DC, power consumption of 0.3 W. Operating temperature of 0°C to +50°C. Corrosion-resistant plastic housing, IP68 waterproof rating and pressure resistance of 0.2 MPa.

Typical uses. Real-time monitoring of toxic free ammonia in aquaculture tanks, nitrification monitoring in municipal wastewater aeration basins, and environmental monitoring of rivers, lakes or reservoirs. The sensor is factory calibrated and supports two-point electrode calibration via register settings.

Integration. Tutorials are available for connecting the sensor to an Arduino board and a DFRobot LoRaWAN module for quick setup of a test environment and real-time data monitoring.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote