Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0712 – Industrial RS485 Residual Chlorine Sensor for Water

Industrial RS485 Residual Chlorine Sensor for Water

pH and Conductivity Analyzers

  • RS-485
  • Modbus
Manufacturer part number
SEN0712
Manufacturer
DFRobot

DFRobot SEN0712 industrial residual chlorine sensor measuring 0 to 10 mg/L. It outputs readings over RS485 with ModBus-RTU and withstands continuous submersion, for water quality monitoring.

Product overview

Overview. The DFRobot SEN0712 RS485 industrial residual chlorine sensor is a water quality sensor designed to measure residual chlorine concentrations accurately, namely hypochlorous acid and hypochlorite ions, over a range of 0 to 10 mg/L. Each unit is factory-calibrated, so no secondary calibration is needed at installation.

Measurement performance. Resolution of 0.01 mg/L, measurement error of ±5%FS and repeatability error of ±0.05 mg/L. The response time is less than 30 s.

Connectivity. RS485 communication interface with full support for the standard ModBus-RTU protocol, for integration into industrial and IoT systems. Tutorials are available for pairing with Arduino boards and DFRobot LoRaWAN networks.

Power and environment. Power supply of 10 to 30 V DC, power consumption of 0.2 W, operating temperature from 0 °C to +50 °C, pressure resistance of 0.6 MPa and IP68 waterproof rating. Corrosion-resistant plastic housing with a 5 m cable.

Typical uses. Tap water quality monitoring, drinking water treatment and purification, swimming pool disinfection.

Maintenance. The probe cap is sealed with a protective liquid (3.3 mol/L KCl). White crystals may form around tightly secured caps; this standard chemical occurrence does not affect the probe's lifespan or accuracy.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote