SER0011
Metal Gear Micro Servo with Coreless Motor

- Operating Temperature Range
- -10℃~+50℃; ≤90%RH
- Storage Temperature Range
- -20℃~+60℃; ≤90%RH
- Pulse Width Range
- 500~2500μs
- Communication interface
- PWM
Metal Gear Micro Servo with Coreless Motor
Educational STEM Coding & Sensor Starter Packs
Digital micro metal gear servo controlled by PWM, for robotics, scale models and DIY projects. Powered from 4.8 to 6 V DC.
Overview. The DFRobot 9025MG is a digital micro servo with metal gears, controlled by PWM signal, designed for DIY projects, robotics and small transmission mechanisms.
Main characteristics. Its coreless motor and metal gears provide fast response and positioning accuracy, with angle deviation of 1° or less and backlash of 1° or less. Dead band width is limited to 3 μs. Rated torque is 0.33 kgf·cm at 4.8 V and 0.37 kgf·cm at 6 V, with stall torque of 1.3 kgf·cm at 4.8 V and 1.5 kgf·cm at 6 V. Operating travel angle is 90° ±10° between 1000 and 2000 μs, and the mechanical limit angle reaches 210°. Noise level is 50 dBA or less and weight is 13.5 ±0.5 g.
Interfaces and power. It is controlled by PWM over a pulse width range of 500 to 2500 μs, with neutral position set at 1500 μs. It operates from 4.8 to 6 V DC. Standby current is 8 mA or less at 6 V, no-load current is 150 mA or less at 4.8 V and 170 mA or less at 6 V, and stall current is 700 mA or less at 4.8 V and 800 mA or less at 6 V. It is fitted with a JR-type connector.
Environmental conditions. Operating temperature range is -10 °C to +50 °C at 90 % RH or less, and storage temperature range is -20 °C to +60 °C at 90 % RH or less.
Typical uses. Joints for micro and desktop robotic arms, bionic robots, steering and throttle control for RC models, DIY home automation and sensor pan-tilt mechanisms in STEM education projects.
Integration. The JR connector and standard PWM control allow direct connection to compatible boards and controllers without complex wiring.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SER0011, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Angle Deviation | ≤1° |
| Backlash | ≤1° |
| Case Material | ABS |
| Clutch Protection | No |
| Communication interface | PWM |
| Current Protection | No |
| Dead Band Width | ≤3μs |
| Gear Set Material | Metal gear |
| Horn Type | 40T/Φ4.85mm |
| L&R Angle Deviation | ≤5° |
| Mechanical Limit Angle | 210° |
| Motor Type | Coreless motor |
| Neutral Position | 1500μs |
| No-load current | ≤150mA at 4.8V; ≤170mA at 6.0V |
| No-load Speed | ≤0.13sec/60° at 4.8V; ≤0.11sec/60° at 6.0V |
| Noise Level | ≤50dBA |
| Operating Life Time | Rated load life continuous operation test life ≥120h |
| Operating Temperature Range | -10℃~+50℃; ≤90%RH |
| Operating Travel Angle | 90°±10° (1000~2000μs) |
| Operating Voltage | 4.8-6V DC |
| Pulse Width Range | 500~2500μs |
| Rated Torque | ≥0.33kgf·cm at 4.8V; ≥0.37kgf·cm at 6.0V |
| Rotating Direction | CCW (1000→2000μs) |
| Stall Current | ≤700mA at 4.8V; ≤800mA at 6.0V |
| Stall Torque | ≥1.3kgf·cm at 4.8V; ≥1.5kgf·cm at 6.0V |
| Standby Current | ≤8mA at 6.0V |
| Storage Temperature Range | -20℃~+60℃; ≤90%RH |
| Weight | 13.5±0.5g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SER0011. For a missing document or a specific revision, our experts send it to you.
Digital micro metal gear servo controlled by PWM, for robotics, scale models and DIY projects. Powered from 4.8 to 6 V DC.
| Parameter | Value |
|---|---|
| Angle Deviation | ≤1° |
| Backlash | ≤1° |
| Case Material | ABS |
| Clutch Protection | No |
| Communication interface | PWM |
| Current Protection | No |
| Dead Band Width | ≤3μs |
| Gear Set Material | Metal gear |
| Horn Type | 40T/Φ4.85mm |
| L&R Angle Deviation | ≤5° |
| Mechanical Limit Angle | 210° |
| Motor Type | Coreless motor |
| Neutral Position | 1500μs |
| No-load current | ≤150mA at 4.8V; ≤170mA at 6.0V |
| No-load Speed | ≤0.13sec/60° at 4.8V; ≤0.11sec/60° at 6.0V |
| Noise Level | ≤50dBA |
| Operating Life Time | Rated load life continuous operation test life ≥120h |
| Operating Temperature Range | -10℃~+50℃; ≤90%RH |
| Operating Travel Angle | 90°±10° (1000~2000μs) |
| Operating Voltage | 4.8-6V DC |
| Pulse Width Range | 500~2500μs |
| Rated Torque | ≥0.33kgf·cm at 4.8V; ≥0.37kgf·cm at 6.0V |
| Rotating Direction | CCW (1000→2000μs) |
| Stall Current | ≤700mA at 4.8V; ≤800mA at 6.0V |
| Stall Torque | ≥1.3kgf·cm at 4.8V; ≥1.5kgf·cm at 6.0V |
| Standby Current | ≤8mA at 6.0V |
| Storage Temperature Range | -20℃~+60℃; ≤90%RH |
| Weight | 13.5±0.5g |
Points to check before using SER0011 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Current Protection | No |
| No-load current | ≤150mA at 4.8V; ≤170mA at 6.0V |
| Operating Voltage | 4.8-6V DC |
| Stall Current | ≤700mA at 4.8V; ≤800mA at 6.0V |
| Standby Current | ≤8mA at 6.0V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SER0011 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Weight": 13.5±0.5g.
-10℃~+50℃; ≤90%RH (source: Operating Temperature Range).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Metal Gear Micro Servo with Coreless Motor

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SER0011 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details