Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SER0037 – 9 g 270° Miniature Servo with DC Brushed Motor

9 g 270° Miniature Servo with DC Brushed Motor

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
SER0037
Manufacturer
DFRobot

DFRobot miniature servo weighing 11.2 g with 270° rotation, PWM control, for lightweight electromechanical projects and educational kits.

Product overview

Overview. The DFRobot SER0037 9g 270° miniature servo is an actuator designed for lightweight electromechanical projects. It combines a DC brushed motor with an analog potentiometer providing closed-loop position feedback.

Main characteristics. Stall torque of 0.7 kgf·cm at 4.8 V and 1.2 kgf·cm at 6 V, no-load speed of 0.1 sec/60° at 4.8 V and 0.09 sec/60° at 6 V, operating angle range of 270° ± 5° with a positioning accuracy of ±3°. Gear playback is ≤1° and hysteresis ≤2°. Stated load life above 100,000 cycles. Weight 11.2 g.

Control and interfaces. PWM protocol, pulse width range 500 to 2500 µs, middle position at 1500 µs, dead zone 8 µs and signal frequency 50 to 333 Hz. Signal levels high 2.4 to 5.5 V and low -0.3 to 0.9 V. JR connector at 2.54 mm pitch, 275 mm wires (yellow signal, red VCC, brown GND). 20T Φ1.9 mm spline output shaft with M1.6x5 screw.

Power and environment. Operating voltage 4.8 to 6.0 V. Operating temperature -10 to 50 °C, protection rating IP42, noise 60 dB ± 5 at 50 cm. Plastic housing and POM gears.

Typical uses and integration. Compatible with Arduino boards according to the manufacturer, this servo suits STEM educational kits, radio-controlled models and micro-drive home automation applications. Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote