Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SER0047 – 9g Metal Servo 180° with Analog Feedback

9g Metal Servo 180° with Analog Feedback

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
SER0047
Manufacturer
DFRobot

DFRobot SER0047 9g metal gear servo with 180° rotation and 0-3.3V analog feedback, designed for precise control of micro-robots and small mechanisms.

Product overview

DFRobot SER0047 servo. The DFRobot SER0047 is a 9g servo with metal gears, presented by the manufacturer for controlling micro-robots. Its housing measures 22.9 × 12.2 × 32.5 mm.

Main characteristics. Stall torque reaches 1.3 ± 0.1 kg·cm at 4.8 V and 1.5 ± 0.1 kg·cm at 6.0 V. The operating travel is 180° ± 5° for a pulse between 500 and 2500 μsec, with a maximum travel of 220° ± 10°. The rotation direction is clockwise. The servo has no internal limit switch and can be turned manually through 360°.

Control and feedback. The control signal is a pulse width signal, with a neutral position at 1500 μsec and a dead bandwidth of 5 μsec or less. An analog signal of 0 to 3.3 V, carried on the brown wire, allows closed-loop feedback control with a microcontroller. The manufacturer states compatibility with the Arduino Servo Library. Left and right travelling angle deviation is 3° maximum and centering deviation is 1° maximum.

Power and environment. The operating voltage ranges from 4.8 V to 6 V. The no-load current is 200 ± 20 mA at 4.8 V and the static current is 40 ± 5 mA or less. The weight is 12 ± 1 g. The operating temperature range is -10 °C to 50 °C and the storage temperature range is -20 °C to 60 °C. The manufacturer warns that over-voltage or deliberately blocking the servo will permanently damage it.

Typical uses. This servo suits the control of small robot joints, positioning mechanisms, and educational or prototyping projects driven by a microcontroller board compatible with Arduino.

Integration. The wiring has four wires: red for positive, black for negative, white for the control signal and brown for the analog feedback.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote