SER0063
Waterproof IP54 20KG 180° digital servo with copper metal gears

- Operating Temperature
- -20°C~60°C
- Pulse Width Range
- 500→2500µsec
- Operating Current
- 100mA @6V,120mA @7.4V
- Rated Current
- 800mA @6V,1000mA @7.4V
Waterproof IP54 20KG 180° digital servo with copper metal gears
Educational STEM Coding & Sensor Starter Packs
The IP54 waterproof DFRobot SER0063 digital servo delivers 20kg.cm stall torque at 7.4V over a 180° control angle. It features copper gears, dual ball bearings, and built-in thermal and lock-up protections.
Overview. The DFRobot SER0063 water-resistant digital servo is built for robotic actuators and automated machinery. It features internal copper gears (1/275 reduction ratio, ≤0.5° gear backlash), dual ball bearings, and a PA+Aluminum casing that enhances heat dissipation.
Torque, speed, and PWM control. Operating from 5-8.4V, the servo delivers a stall torque of 16.5kg.cm (229.54oz.in) @ 6V and 20kg.cm (278.23oz.in) @7.4V (rated load 5.5kg.cm @6V, 6.5kg.cm @7.4V; stall current 2.3A @6V, 3A @7.4V) with no-load speeds of 0.185sec/60° (54RPM) @6V and 0.151sec/60° (66RPM) @7.4V. Driven by a 20ms PWM signal (500→2500µsec pulse width, 1500µsec neutral, ≤4µsec dead band), it provides 180° rotation via a 25T/5.9mm output shaft (M3X6 screw).
Protection and IP54 rating. Electronic protection engages after 8 seconds of continuous overload lock-up, while temperature protection halts torque output above >70°C until cooled. Fortified with waterproof gaskets, a varnished PCB, and sealed motor and potentiometer joints, the SER0063 achieves an IP54 splash-proof rating across -20°C~60°C.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SER0063, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Angle | 180° (at 500→2500µsec) |
| Angle Difference | ≤5° |
| Arm Backlash | 0° |
| Bearing Type | Ball Bearing |
| Casing material | PA+Aluminum |
| Control signal | PWM |
| Dead Band Width | ≤4µsec |
| Electronic Protection | 8 seconds lock-up |
| Gear Backlash | ≤0.5° |
| Gear Material | Copper |
| Kt Constant | 6.5kg.cm/A |
| Motor Noise | 45±5dB |
| Neutral Position | 1500µsec |
| No-load Speed | 0.185sec/60° (54RPM) @6V,0.151sec/60° (66RPM) @7.4V |
| Operating Current | 100mA @6V,120mA @7.4V |
| Operating Temperature | -20°C~60°C |
| Operating Voltage | 5-8.4V |
| Output Shaft | 25T/5.9mm |
| Output Shaft Screw | M3X6 |
| Pulse Width Range | 500→2500µsec |
| Rated Current | 800mA @6V,1000mA @7.4V |
| Rated Load | 5.5kg.cm @6V,6.5kg.cm @7.4V |
| Reduction ratio | 1/275 |
| Return Difference | ≤1° |
| Rotation Direction | Counterclockwise (from 1500 → 2000µsec) |
| Servo No-Load Noise | 60±5dB |
| Signal High Voltage | 2-5V |
| Signal Low Voltage | 0-0.45V |
| Signal Period | 20ms |
| Stall Current | 2.3A @6V,3A @7.4V |
| Stall Torque | 16.5kg.cm/229.54oz.in @ 6V,20kg.cm/278.23oz.in @7.4V |
| Static Current | 6mA |
| Storage Temperature | -30°C~80°C |
| Temperature Protection | >70°C |
| Waterproof rating | IP54 (splash-proof) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SER0063. For a missing document or a specific revision, our experts send it to you.
The IP54 waterproof DFRobot SER0063 digital servo delivers 20kg.cm stall torque at 7.4V over a 180° control angle. It features copper gears, dual ball bearings, and built-in thermal and lock-up protections.
| Parameter | Value |
|---|---|
| Angle | 180° (at 500→2500µsec) |
| Angle Difference | ≤5° |
| Arm Backlash | 0° |
| Bearing Type | Ball Bearing |
| Casing material | PA+Aluminum |
| Control signal | PWM |
| Dead Band Width | ≤4µsec |
| Electronic Protection | 8 seconds lock-up |
| Gear Backlash | ≤0.5° |
| Gear Material | Copper |
| Kt Constant | 6.5kg.cm/A |
| Motor Noise | 45±5dB |
| Neutral Position | 1500µsec |
| No-load Speed | 0.185sec/60° (54RPM) @6V,0.151sec/60° (66RPM) @7.4V |
| Operating Current | 100mA @6V,120mA @7.4V |
| Operating Temperature | -20°C~60°C |
| Operating Voltage | 5-8.4V |
| Output Shaft | 25T/5.9mm |
| Output Shaft Screw | M3X6 |
| Pulse Width Range | 500→2500µsec |
| Rated Current | 800mA @6V,1000mA @7.4V |
| Rated Load | 5.5kg.cm @6V,6.5kg.cm @7.4V |
| Reduction ratio | 1/275 |
| Return Difference | ≤1° |
| Rotation Direction | Counterclockwise (from 1500 → 2000µsec) |
| Servo No-Load Noise | 60±5dB |
| Signal High Voltage | 2-5V |
| Signal Low Voltage | 0-0.45V |
| Signal Period | 20ms |
| Stall Current | 2.3A @6V,3A @7.4V |
| Stall Torque | 16.5kg.cm/229.54oz.in @ 6V,20kg.cm/278.23oz.in @7.4V |
| Static Current | 6mA |
| Storage Temperature | -30°C~80°C |
| Temperature Protection | >70°C |
| Waterproof rating | IP54 (splash-proof) |
Points to check before using SER0063 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | 100mA @6V,120mA @7.4V |
| Operating Voltage | 5-8.4V |
| Rated Current | 800mA @6V,1000mA @7.4V |
| Signal High Voltage | 2-5V |
| Signal Low Voltage | 0-0.45V |
| Stall Current | 2.3A @6V,3A @7.4V |
| Static Current | 6mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SER0063 can answer. A question is not asked when nothing is recorded to answer it.
-20°C~60°C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Waterproof IP54 20KG 180° digital servo with copper metal gears

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SER0063 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details