SER0065 – Waterproof IP54 coreless digital servo 35KG 180° with steel gears

Waterproof IP54 coreless digital servo 35KG 180° with steel gears

Educational STEM Coding & Sensor Starter Packs

  • -10°C ~ 60°C
  • 10mA
  • -20°C ~ 80°C
  • ≤ 5°
Manufacturer part number
SER0065
Manufacturer
DFRobot
Operating Temperature
-10°C ~ 60°C
Static Current
10mA

The IP54 waterproof DFRobot SER0065 digital servo combines a hollow-cup coreless motor, reinforced steel gears, and an aluminum housing to deliver 35KG torque across a 180° angle on 5-9V.

Product overview

Overview. The DFRobot SER0065 is a high-torque (35KG class) digital servo engineered with a hollow-cup coreless motor, reinforced steel gears supported by dual ball bearings (≤ 0.5° gear backlash), and a PA+Aluminum casing for heat dissipation in robotics and automated machinery.

Dynamic performance and PWM control. Operating across 5-9V, the servo achieves no-load speeds of 0.142sec/60° (70RPM) @6V, 0.111sec/60° (90RPM) @7.4V, and 0.098sec/60° (102RPM) @ 8.4V (operating current 260mA@6V, 300mA @7.4V, 340mA@8.4V; Kt constant 9.7kg.cm/A). Controlled via a 20ms PWM signal (500 → 2500 μsec pulse width, 1500μsec neutral position, ≤ 4μsec deadband), it rotates through 180° ± 5° and drives a 25T/5.9mm output shaft (M3X6 screw).

Electronic protection and IP54 sealing. Built-in overload protection drops current by 80% after 8 seconds of continuous stall, complemented by > 70°C thermal protection. Waterproof gaskets, a varnished circuit board, and adhesive-sealed motor and potentiometer assemblies provide IP54 splash-proof protection from -10°C ~ 60°C.

See all specifications

Highlights

  • Angle: 180° ± 5° (at 500 → 2500μsec)
  • Angle Deviation: ≤ 5°
  • Arm Backlash: 0°
  • Bearing Type: Ball Bearing
  • Casing material: PA+Aluminum
  • Centering Deviation: ≤ 1°

Good to know before integrating

  • Thermal: rated operating range -10°C ~ 60°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote