SER0071 – Industrial All-Metal PWM Magnetic Encoder Brushless Servo

Industrial All-Metal PWM Magnetic Encoder Brushless Servo

Educational STEM Coding & Sensor Starter Packs

  • 500μs – 2500μs
  • 360mA @ 24V
  • 3.5A @ 24V
  • 10.8A @ 24V
Manufacturer part number
SER0071
Manufacturer
DFRobot
Pulse Range
500μs – 2500μs
No-load current
360mA @ 24V

Industrial brushless servo with a 12-bit magnetic encoder and IP65 aluminum housing, designed for heavy-load control in robotics, automation, marine and construction applications.

Product overview

Overview. The DFRobot SER0071 is an industrial PWM brushless servo actuator with a magnetic encoder, intended for high-load motion control. It combines a 24V brushless motor, a 12-bit magnetic encoder and a stall torque of 450 kg·cm at 24V.

Main characteristics. The servo offers a 180° operating angle, a positional resolution of 0.09° and an angular deviation of 1° or less. The output is a 25-tooth spline shaft of 11.8 mm diameter, reduced by a 1:252 gear ratio with hardened steel gears. The no-load speed is 35 RPM at 24V, and the load lifespan exceeds 100,000 cycles.

Interfaces and control. The control signal is PWM, with a pulse range of 500 μs to 2500 μs. Power is supplied through an XT30 connector.

Power and environment. The operating voltage ranges from 16V to 28V, with 24V recommended. The rated current is 3.5A at 24V and the stall current 10.8A at 24V. The aluminum alloy housing has an IP65 rating, protecting against dust and water jets. The operating temperature range is -40°C to 60°C. The weight is 850g and the dimensions 86 × 45 × 100.3 mm.

Typical uses. The servo suits large manipulator joints and AGV steering systems in heavy robotics, large valve control, sorting and stamping machinery in industrial automation, rudder, winch and windlass drives in marine equipment, and construction vehicle joints and PTZ platforms.

See all specifications

Highlights

  • Dimensions: 86 × 45 × 100.3 mm
  • IP rating: IP65 (Dust-tight and Water-resistant)
  • Angular Deviation: ≤ 1°
  • Control signal: PWM
  • Gear ratio: 1:252
  • Gears: Hardened Steel

Good to know before integrating

  • Thermal: rated operating range -40°C to 60°C (-40°F to 140°F) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote