SER0072
Industrial All-Metal PWM Magnetic Encoder Brushless Servo, IP65

- Operating temperature
- -40°C to +60°C
- Pulse Range
- 500-2500μs
- No-load current
- 300mA
- Rated Current
- 3300mA
Industrial All-Metal PWM Magnetic Encoder Brushless Servo, IP65
Educational STEM Coding & Sensor Starter Packs
DFRobot SER0072 industrial brushless servo with 600 kg·cm stall torque and PWM control, for heavy robotic joints and actuation in demanding environments.
Overview. The DFRobot SER0072 is a PWM brushless servo with a magnetic encoder, designed for applications requiring high torque, strong robustness and precise position control. It drives a heavy joint from a 24 V brushless motor and a steel gear reduction of 1:390.
Main characteristics. Stall torque reaches 600 kg·cm (8347 oz·in) with a rated load of 200 kg·cm and a stall current of 9.8 A. Mechanical rotation is 180° for a pulse range of 500 to 2500 μs, with a resolution of 0.09° (180°/2000 steps). The sensor is a 12-bit magnetic encoder. Weight is 800 ± 5 g and dimensions are 100 × 51 × 81.4 mm.
Control and connection. The servo is driven by a PWM signal, with high-level voltage of 2 to 5 V and low-level voltage of 0 to 0.45 V. The three-pin JR-type cable, 43 ± 1 cm long, connects black to GND, red to VCC 5 V and white to the signal. The maximum update rate is 20 ms and the neutral position is 1500 μs, with clockwise rotation from 1500 to 2000 μs.
Power and environment. Operating voltage is 16 to 28 V, typically 24 V. No-load current is 300 mA and standby current 20 mA. The aluminium housing provides IP65 protection and the operating temperature range runs from −40 °C to +60 °C, with storage possible from −40 °C to +80 °C.
Typical uses. Joints of heavy robotic arms, marine steering mechanisms and actuation of high-load industrial equipment, in the dust and water-jet conditions covered by the IP65 rating.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SER0072, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 100×51×81.4mm |
| IP rating | IP65 |
| Operating temperature | -40°C to +60°C |
| Angle Deviation | ≤1° |
| Bearing | Ball bearing |
| Cable Length | 43±1cm |
| Center deviation | ≤1° |
| Connectors | 3-pin control (JR type): Black-GND, Red-VCC (5V), White-Signal |
| Control type | Digital comparator |
| Deadband Width | ≤4μs |
| Gear Backlash | ≤0.5° |
| Gear Material | Steel |
| Gear ratio | 1:390 |
| High-level voltage | 2–5V |
| Housing | Aluminum |
| Load Lifespan | >200,000 cycles |
| Low-level voltage | 0–0.45V |
| Max Update Rate | 20ms |
| Motor Noise | 55±5dB |
| Motor Type | Brushless |
| Neutral Position | 1500μs |
| No-load current | 300mA |
| No-load Speed | 0.588s/60° (17RPM) |
| Operating Angle | 180° (500–2500μs pulse) |
| Operating Voltage | 16–28V (typical: 24V) |
| Output Shaft | circular (12mm) |
| Pulse Range | 500-2500μs |
| Rated Current | 3300mA |
| Rated Load | 200kg·cm |
| Resolution | 0.09° (180°/2000 steps) |
| Rotation | 180° |
| Rotation Direction | Clockwise (1500→2000μs) |
| Sensor | 12-bit magnetic encoder |
| Servo noise | 70±5dB |
| Signal | PWM |
| Stall Current | 9.8A |
| Stall Torque | 600kg·cm (8347oz·in) |
| Standby Current | 20mA |
| Storage Temp | -40°C to +80°C |
| Torque constant (Kt) | 61.22kg·cm/A |
| Weight | 800±5g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SER0072. For a missing document or a specific revision, our experts send it to you.
DFRobot SER0072 industrial brushless servo with 600 kg·cm stall torque and PWM control, for heavy robotic joints and actuation in demanding environments.
| Parameter | Value |
|---|---|
| Dimensions | 100×51×81.4mm |
| IP rating | IP65 |
| Operating temperature | -40°C to +60°C |
| Angle Deviation | ≤1° |
| Bearing | Ball bearing |
| Cable Length | 43±1cm |
| Center deviation | ≤1° |
| Connectors | 3-pin control (JR type): Black-GND, Red-VCC (5V), White-Signal |
| Control type | Digital comparator |
| Deadband Width | ≤4μs |
| Gear Backlash | ≤0.5° |
| Gear Material | Steel |
| Gear ratio | 1:390 |
| High-level voltage | 2–5V |
| Housing | Aluminum |
| Load Lifespan | >200,000 cycles |
| Low-level voltage | 0–0.45V |
| Max Update Rate | 20ms |
| Motor Noise | 55±5dB |
| Motor Type | Brushless |
| Neutral Position | 1500μs |
| No-load current | 300mA |
| No-load Speed | 0.588s/60° (17RPM) |
| Operating Angle | 180° (500–2500μs pulse) |
| Operating Voltage | 16–28V (typical: 24V) |
| Output Shaft | circular (12mm) |
| Pulse Range | 500-2500μs |
| Rated Current | 3300mA |
| Rated Load | 200kg·cm |
| Resolution | 0.09° (180°/2000 steps) |
| Rotation | 180° |
| Rotation Direction | Clockwise (1500→2000μs) |
| Sensor | 12-bit magnetic encoder |
| Servo noise | 70±5dB |
| Signal | PWM |
| Stall Current | 9.8A |
| Stall Torque | 600kg·cm (8347oz·in) |
| Standby Current | 20mA |
| Storage Temp | -40°C to +80°C |
| Torque constant (Kt) | 61.22kg·cm/A |
| Weight | 800±5g |
Points to check before using SER0072 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| High-level voltage | 2–5V |
| Low-level voltage | 0–0.45V |
| No-load current | 300mA |
| Operating Voltage | 16–28V (typical: 24V) |
| Rated Current | 3300mA |
| Stall Current | 9.8A |
| Standby Current | 20mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SER0072 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Weight": 800±5g.
-40°C to +60°C (source: Operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial All-Metal PWM Magnetic Encoder Brushless Servo, IP65

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SER0072 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details