SER0073
Industrial Brushless PWM Servo with Magnetic Encoder 24 V

- Operating temperature
- -40°C to 60°C (-40°F to 140°F)
- Dimensions
- 90 x 48 x 109.3 mm
- IP rating
- IP65
- Chassis
- Full Aluminum Body
Industrial Brushless PWM Servo with Magnetic Encoder 24 V
Educational STEM Coding & Sensor Starter Packs
Industrial brushless servo, 24 V DC with PWM control, designed to drive heavy mechanisms with 750 kg·cm stall torque and an IP65 all-aluminium body.
DFRobot SER0073. This industrial brushless PWM servo with 12-bit magnetic encoder is a high-torque actuator for heavy mechanical systems, robots and automation equipment. Main characteristics — The high-efficiency brushless motor delivers 750 kg·cm stall torque and a speed of 0.385 sec/60°, over a 180° rotation angle. The hardened steel gears transfer the power. Precision — The non-contact 12-bit magnetic encoder provides a resolution of 0.09°. Interfaces and control — The servo is driven by a standard PWM signal of 500–2500 µs, with a 25-tooth spline output shaft of 11.8 mm diameter. Power and environment — Nominal operating voltage of 24 V DC, operating temperature range of -40°C to 60°C, IP65 protection rating and full aluminium chassis. Dimensions 90 x 48 x 109.3 mm for a weight of 1050 g. Typical uses — Robot joints, high-load mechanical linkages and automation equipment exposed to the environment, within the specifications above.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SER0073, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 90 x 48 x 109.3 mm |
| IP rating | IP65 |
| Operating temperature | -40°C to 60°C (-40°F to 140°F) |
| Chassis | Full Aluminum Body |
| Control signal | Standard PWM (500–2500μs) |
| Gears | Hardened Steel |
| Motor Type | High-efficiency Brushless |
| Operating Voltage | 24V DC (nominal) |
| Output Shaft | 25T Spline (11.8mm diameter) |
| Resolution | 0.09° |
| Rotation Angle | 180° |
| Sensor | 12-bit Magnetic Encoder |
| Speed | 0.385 sec/60° |
| Stall Torque | 750 kg·cm (10433 oz·in) |
| Weight | 1050 g (2.31 lbs) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SER0073. For a missing document or a specific revision, our experts send it to you.
Industrial brushless servo, 24 V DC with PWM control, designed to drive heavy mechanisms with 750 kg·cm stall torque and an IP65 all-aluminium body.
| Parameter | Value |
|---|---|
| Dimensions | 90 x 48 x 109.3 mm |
| IP rating | IP65 |
| Operating temperature | -40°C to 60°C (-40°F to 140°F) |
| Chassis | Full Aluminum Body |
| Control signal | Standard PWM (500–2500μs) |
| Gears | Hardened Steel |
| Motor Type | High-efficiency Brushless |
| Operating Voltage | 24V DC (nominal) |
| Output Shaft | 25T Spline (11.8mm diameter) |
| Resolution | 0.09° |
| Rotation Angle | 180° |
| Sensor | 12-bit Magnetic Encoder |
| Speed | 0.385 sec/60° |
| Stall Torque | 750 kg·cm (10433 oz·in) |
| Weight | 1050 g (2.31 lbs) |
Points to check before using SER0073 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 24V DC (nominal) |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SER0073 can answer. A question is not asked when nothing is recorded to answer it.
-40°C to 60°C (-40°F to 140°F) (source: Operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial Brushless PWM Servo with Magnetic Encoder 24 V

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SER0073 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details