TEL0073
Bluetooth 4.0 BLE module for Arduino with XBee form factor

- Operating Temperature
- -40 ℃ ~ +85 ℃
- Frequency
- 2.4GHz
- Chip
- TI CC2540>
- Modulation
- GFSK, bluetooth low power, V4.0
Bluetooth 4.0 BLE module for Arduino with XBee form factor
Bluetooth 4.0 BLE module in XBee form factor that turns an Arduino board into a BLE-ready board through its serial port. Works with any shield with an XBee socket.
Overview. The DFRobot TEL0073 Bluno Bee is a serial to Bluetooth 4.0 (BLE) module in XBee form factor, based on the TI CC2540 chip. It plugs into the XBee socket of an Arduino expansion shield to make the board BLE-ready without hardware modification.
Main characteristics. The module operates from 3.3 to 5 V DC and includes a voltage regulator supporting both 5 V and 3.3 V microcontrollers. Its power consumption is 10.6 mA on average in working mode and 8.7 mA in ready mode. It operates at 2.4 GHz with GFSK modulation, a transfer rate of up to 1 Mbps, a sensitivity of -93 dB and a transmission distance of 60 m in free space. Its operating temperature range is -40 °C to +85 °C. Its size is 32 mm × 22 mm.
Interfaces and connectivity. The pinout is compatible with XBee. The module supports transparent point-to-point transmission, master-slave switching, wireless programming of the Arduino processor (compatible with Arduino UNO, Fio and Mega), BLE firmware updates over USB, Bluetooth HID for PC connection, and AT commands for debugging.
Typical uses. Two Bluno Bee modules allow two Arduino boards to communicate over Bluetooth. The module suits wearable applications, for example a smart pedometer bracelet combining Arduino and an Android or iOS smartphone, supported by DFRobot's Play Bluno applications for Android and iOS and by open source code.
Integration. The product is supplied alone and documented by a product wiki and a V1.1 schematic. It is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for TEL0073, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Chip | TI CC2540> |
| Frequency | 2.4GHz |
| Modulation | GFSK, bluetooth low power, V4.0 |
| Operating Temperature | -40 ℃ ~ +85 ℃ |
| Pin Layout | Compatible with Xbee pinout |
| Power consumption | working: 10.6mA average, ready mode: 8.7mA |
| Sensitivity | -93dB |
| Size | 32mm * 22mm (1.26 * 0.87") |
| Transfer rate | ≤1Mbps |
| Transmission Distance | 60m in free space |
| Working voltage | +3.3 -5v DC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for TEL0073. For a missing document or a specific revision, our experts send it to you.
Bluetooth 4.0 BLE module in XBee form factor that turns an Arduino board into a BLE-ready board through its serial port. Works with any shield with an XBee socket.
| Parameter | Value |
|---|---|
| Chip | TI CC2540> |
| Frequency | 2.4GHz |
| Modulation | GFSK, bluetooth low power, V4.0 |
| Operating Temperature | -40 ℃ ~ +85 ℃ |
| Pin Layout | Compatible with Xbee pinout |
| Power consumption | working: 10.6mA average, ready mode: 8.7mA |
| Sensitivity | -93dB |
| Size | 32mm * 22mm (1.26 * 0.87") |
| Transfer rate | ≤1Mbps |
| Transmission Distance | 60m in free space |
| Working voltage | +3.3 -5v DC |
Points to check before using TEL0073 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power consumption | working: 10.6mA average, ready mode: 8.7mA |
| Working voltage | +3.3 -5v DC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of TEL0073 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Modulation": GFSK, bluetooth low power, V4.0.
-40 ℃ ~ +85 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Bluetooth 4.0 BLE module for Arduino with XBee form factor

Nordic module delevopment board transmitter and receiver module

Ai-WB2-32S-Kit, BL602 based Wi-Fi&BLE module, ideal for IoT projects

MDBT50Q-1MV2 nRF52840 Based BLE Module

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | TEL0073 |
| Manufacturer | DFRobot |
Bluetooth Modules
Bluetooth 5.3 Low Energy module with 12 GPIOs · Ref. : BDE-LE2340R21GE
Price on request
Bluetooth Modules
Wi-Fi Bluetooth BLE MCU Module 2.4 GHz with Integrated Antenna · Ref. : ESP32WRMD4M
Price on request
Bluetooth Modules
Dual-Mode Wi-Fi and Bluetooth Module with Dual-Core MCU · Ref. : TEL0111
Price on request
Bluetooth Modules
nRF52805 Bluetooth Low Energy Module 2.4 GHz · Ref. : MK14
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details