TEL0125 – LoRa 868 MHz radio module for FireBeetle

LoRa 868 MHz radio module for FireBeetle

Educational STEM Coding & Sensor Starter Packs

  • -20℃~+70℃
  • -1dBm~20dBm(Max)
  • ≤120mA
  • ≤15mA
Manufacturer part number
TEL0125
Manufacturer
DFRobot
Operating Temperature
-20℃~+70℃
Transmission Power Range
-1dBm~20dBm(Max)

LoRa 868 MHz radio module for the FireBeetle board, designed for long-range, low-power links in remote IoT monitoring applications.

Product overview

DFRobot TEL0125 LoRa 868 MHz radio module — This radio expansion module for the DFRobot FireBeetle board, named FireBeetle Covers LoRa Radio 868MHz (V1.0), integrates an SX1276 LoRa 868 MHz chip and a built-in power amplifier. It is designed for low-power IoT microcontrollers.

Main characteristics. Operating at 3.3 V on a 868 MHz frequency within a 800 MHz to 900 MHz range, the module delivers an output power of at most 20 dBm, with a transmission power range from -1 dBm to 20 dBm. Its receiving sensitivity reaches -139 dBm in LoRa mode, with a maximum RSSI of 127 dB and a transmission distance of 5 km.

Interfaces and connectivity. The module supports LoRa, FSK, GFSK and OOK modulations, with a data rate of 1.2 to 300 Kbps in FSK and 0.018 to 37.5 Kbps in LoRa. It provides an SPI interface, 5 GPIO pins that can be used as interruptions, a 256-byte FIFO, FIFO or DMA transmission modes, and support for CRC and frequency hopping.

Power and environment. The emission current is at most 120 mA, the receiving current at most 15 mA, and the sleep current at most 0.2 µA. The operating temperature range is -20 °C to +70 °C. The module measures 58 x 29 mm, with a 3.1 mm inner diameter mounting hole.

Typical uses. This module suits long-range monitoring, remote home automation, detection and wearable devices, as indicated by the manufacturer.

Integration. The kit includes an SMA-KE antenna connector, an 868 MHz spring antenna with IPEX connector, and 2.54 mm pin headers. It is Arduino compatible and mounts on the FireBeetle board.

See all specifications

Highlights

  • Data Transmission Rate: @FSK,1.2~300Kbps @LoRaTM,0.018~37.5Kbps
  • Emission Current: ≤120mA
  • FIFO Volume: 256bytes
  • GPIO Interface: 5 (can be used as interruption)
  • Maximum RSSI: 127dB
  • Modulation: LoRaTM, FSK, GFSK, OOK

Good to know before integrating

  • Thermal: rated operating range -20℃~+70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote