Compact GNSS positioning and navigation module based on the AT6558 chip, receiving several satellite systems including GPS and BDS simultaneously for real-time location.
Positioning Accuracy2.5m(CEP50, open field)
Cold- start Acquisition Sensitivity-148dBm
Dimension13.1 x 15.7mm/0.52 x 0.62”
Low Power<25mA (work continuously)
Operating Voltage3.3-5V
Tracking Sensitivity-162dBm
Product overview
Overview. The DFRobot TEL0132 GPS + BDS BeiDou Dual Module is a compact GNSS positioning and navigation module based on the AT6558 chip. It provides real-time location information and supports several satellite systems, including BDS, GPS, GLONASS, GALILEO, QZSS and the SBAS augmentation systems (WAAS, EGNOS, GAGAN, MSAS), with 32 tracking channels.
Main characteristics. Cold-start acquisition sensitivity of -148 dBm and tracking sensitivity of -162 dBm. Positioning accuracy of 2.5 m (CEP50, open field). Time to first fix of 32 seconds, or a few minutes depending on the environment. A-GNSS support and onboard E2PROM for storing configuration settings. Onboard XH414 rechargeable battery to speed up hot-start and search. Dimensions 13.1 x 15.7 mm.
Interfaces and connectivity. Serial output. SMA and IPEX antenna ports. Built-in antenna detection and antenna short-circuit protection.
Power and environment. Operating voltage 3.3 to 5 V. Consumption below 25 mA in continuous operation, about 0.1 W according to the manufacturer, allowing long continuous operation from a small power supply.
Typical uses. Compatible with Arduino, Raspberry Pi and STM32 boards through its serial output. Its small size allows embedding in drones and smart cars, as well as vehicle navigation, handheld positioning and wearable devices.
Integration. According to the manufacturer, it can also replace the u-blox MAX series modules.
Compact GNSS positioning and navigation module based on the AT6558 chip, receiving several satellite systems including GPS and BDS simultaneously for real-time location.
Positioning Accuracy2.5m(CEP50, open field)
Cold- start Acquisition Sensitivity-148dBm
Dimension13.1 x 15.7mm/0.52 x 0.62”
Low Power<25mA (work continuously)
Operating Voltage3.3-5V
2. Datasheet extract (recorded values)
Parameter
Value
Cold- start Acquisition Sensitivity
-148dBm
Dimension
13.1 x 15.7mm/0.52 x 0.62”
Low Power
<25mA (work continuously)
Operating Voltage
3.3-5V
Positioning Accuracy
2.5m(CEP50, open field)
Time-To -First-Fix
32 seconds (or few minutes, depends on the environment)
Tracking Sensitivity
-162dBm
Applications and use cases
Architectures in which TEL0132 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Surveying and ground monitoring need centimetre positions. RTK GNSS receivers used as base and rover, or RTK modules built into equipment, provide them
To check
Accuracy required and the correction source (own base or network)
Constellations and frequency bands tracked
Correction link between base and rover
Associated system blocks
Survey receiversRTK modules
Need a complete solution?
Send a request for TEL0132 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
TEL0132
Compact GPS and BeiDou dual-constellation GNSS module
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details