ECAN-E01S-V2 – CAN to Ethernet Gateway with 2 CAN Ports

CAN to Ethernet Gateway with 2 CAN Ports

Cellular Modems and Dongles

  • IP, TCP/UDP
  • 100*84*25mm
  • 120g
  • DC 8~28V
Manufacturer part number
ECAN-E01S-V2
Manufacturer
Ebyte
Network Protocol
IP, TCP/UDP
Product Size
100*84*25mm

The Ebyte ECAN-E01S-V2 industrial gateway converts data between two CAN-bus interfaces and an Ethernet network, enabling their intercommunication.

Product overview

Ebyte ECAN-E01S-V2. Industrial CAN to Ethernet gateway, this protocol converter enables intercommunication between a CAN-bus network and an Ethernet network.

Main characteristics. The product integrates 2 CAN-bus interfaces with a maximum baud rate of 1 Mbps and 1 10M/100M Ethernet interface. A built-in 120 ohm resistor can be enabled by dialing. Parameters are configured through host computer configuration software.

Connectivity. The network protocols supported are IP and TCP/UDP. Several working modes are available, including TCP Server, TCP Client and UDP, and the device also supports CAN relay.

Power and environment. Working voltage DC 8 to 28 V. Operating temperature range -40 °C to 85 °C. Dimensions 100 × 84 × 25 mm, weight 120 g.

Typical uses. This gateway connects a CAN-bus network to an Ethernet network, for example to send CAN-bus data to a supervisory system over TCP or UDP.

See all specifications

Highlights

  • Network Protocol: IP, TCP/UDP
  • Product Size: 100*84*25mm
  • Product Weight: 120g
  • Working voltage: DC 8~28V

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote