Ebyte industrial embedded CPU module based on the Allwinner T113-i processor at 1.2GHz, with 1GB memory and 8GB storage, for industrial control, HMI and IoT applications.
Processor Frequency1.2GHz
Memory1GB
Storage8GB
Processor ModelT113-i
Product Weight10±1g
Size46*36*5.3mm
Product overview
Overview. The Ebyte ECK30-T13IC1E8-I is an ARM CPU core board built around the Allwinner T113-i processor. It belongs to Ebyte's ECK 30 series of industrial-grade embedded core boards.
Main characteristics. The T113-i processor runs at 1.2GHz. The module provides 1GB of memory and 8GB of storage. Its dimensions are 46 × 36 × 5.3 mm and its weight is 10 ± 1 g.
Interfaces and connectivity. The module uses a BTB connector, allowing direct integration onto a carrier board.
Typical uses. According to the manufacturer, this embedded core board is intended for industrial control, human-machine interfaces (HMI) and the Internet of Things (IoT). Its low power consumption and cost-performance ratio suit these applications.
Integration. The module is designed to be mounted on a carrier board fitted with a BTB connector, simplifying its implementation in a compact device. It is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for ECK30-T13IC1E8-I_ECK, with where it comes from. Use the filters to find one quickly.
All specifications (7)
Characteristic
Value
Introduction
Ebyte's ECK30-T13IC series core board is meticulously designed based on Allwinner's T113-i processor. Featuring a BTB co
Memory
1GB
Processor Frequency
1.2GHz
Processor Model
T113-i
Product Weight
10±1g
Size
46*36*5.3mm
Storage
8GB
No specification matches.
Last verification : 2026-11-02
Technical documentation
Official documents and the technical data recorded for ECK30-T13IC1E8-I_ECK. For a missing document or a specific revision, our experts send it to you.
Ebyte industrial embedded CPU module based on the Allwinner T113-i processor at 1.2GHz, with 1GB memory and 8GB storage, for industrial control, HMI and IoT applications.
Processor Frequency1.2GHz
Memory1GB
Storage8GB
Processor ModelT113-i
Product Weight10±1g
2. Datasheet extract (recorded values)
Parameter
Value
Introduction
Ebyte's ECK30-T13IC series core board is meticulously designed based on Allwinner's T113-i processor. Featuring a BTB co
Memory
1GB
Processor Frequency
1.2GHz
Processor Model
T113-i
Product Weight
10±1g
Size
46*36*5.3mm
Storage
8GB
Applications and use cases
Architectures in which ECK30-T13IC1E8-I_ECK can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
To check
Outdoor temperature range and ingress protection
Metering accuracy requirements set by local regulation
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for ECK30-T13IC1E8-I_ECK and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details